Search results

Okay - I have tested the Thermal Cut Out for resitance/continuity - when set to the latter I got a beep when touching the two terminals which means its working I think. I took out the flow valve - there was nothing obviously wrong with it. I'm guessing the only way to see if that's the...

Okay so in summary it unlikely to be: 1) thermal cutout - tested on the continuity setting of the multimeter - but less likely as overheat light not on 2) heating element - but unlikely due to getting lukewarm water Correct? And it is most likely to be could/is likely to be the flow...

Even if the overheat light isn't on?

I've checked it again and the dial for heat setting runs from 1 - 10. I can turn it to 4 before the water cuts out and from about 3-4 its ever so slightly luke warm. I had not noticed that before. Does that make it more likely its a pressure thing rather than a heating element? I will take...

The hot water from my Redrig has stopped. The water still flows but stone cold. The Overheat light is Not on and the other indicator light which should be on when shower set to hot water is also working but there's just no hot water. The pressure from the cold water coming out seems fine too...