Search results

That sounds like the answer but a switched spur isnt double pole is it? :?

I put these lights up on the outside of a cinema in stroud and they definatly were connected to a lighting circuit.I guess its to do with fusing down but as far as I can remember they didnt come with flex attached.

I am not sure there is whats it for

Are you sure the plug top you have has no fuse sorry to ask.It seems odd they state do not connect to the light circuit.Does it say why not.

On the box what is the full name and number of the light cheers

You are not wrong I have but they will I think find it harder to carry on with some sort of licensing maybe and the competent scheme checks there work as an on going thing

Sounds to me they need to be on a three amp fuse so you will need to either fit a switch fused spur fitted with a three amp fuse and connect them to that or put a plug top with a three amp fuse in it.

Good thinking sorry

I think it was all brought in to stop cowboy trades we agree that is a good thing We know people will always do thier own work we know some DIYers make a good safe job but also know there are some really bad and dangerous jobs being done by DIYers. So bassically the real problem is bad...

Didnt think a single socket had to be notified How without checking the person doing the work would you know what was worth doing better safe than sorry is the best approach the choice is prove competence There was obviously some reason it was brought in on facts and figures someone had...

You connect both lives to the same mcb on the RCD side of the board might be good idea to ask the electrician to do it while he is there

In the real world most people live in and on topic we are talking how much a hundred 2 hundred quid to a check.Run a risk assesment and you will see there are dangers by DIY electrical work and you need to do all you can to reduce the dangers it may not be the perfect solution but its the only...

I dont think someone who is in the trade should have to join a scheme for domestics I didnt start it Not quite sure I said that Totally agree the cost is to high I have to pay it I just think a life is worth any amount of money but agree its to expensive :D and I dont want to talk...

BAS I am not quite sure you are reading what I am saying quite right here and I think you may have mis understood some of it or maybe I aint no good at putting my point over in text but it is quite clear its a bit of a dodgy subject that we just aint gonna see eye to eye on all of it.So can I go...

Was it done on the milleneum dome or wembley I think its great :D

Is this bloke part p registered :lol: www.time.com/time/magazine/article/0,9171,799464,00.html

chock blocks would be good tape em up too Take it easy and enjoy your new fan

Only thing is its the cable ends that are not used eg earth and switch wire should be in crimps or connectors not just in tape. It also sounds like it wasnt wired right in the first place[the old fan] was it a two core coming into the isolator and a three core out just out of interest

Thanks GaryMo the OP could of got confussed maybe by two contracting answers on reading this thats all I was concerned about and thanks for the watchful eye :D

Not if you read the question maybe :?: