Search results

That's a different matter from it not being permitted.

That's an appendix, isn't it? Informative, not normative. I've yet to see anybody reference an actual regulation number.

There is no regulation to that effect.

In which regulation of BS7671 is the above stated? Reg.number please, not guidance from an appendix which is only advisory.

There is a different version of the NTE5 faceplate that does not have the dsl filter but just provides the test socket and disconnects the extension wiring when removed. I have one of them as my master socket is downstairs at the front but my router is upstairs at the back, so I have an...

You're right, it's acrylic:

Works for weeds but not moss or lichens. I'd suggest blasting the gaps with a pressure washer to remove existing sand, weeds and soil, then when dry, resand and seal. It's worth washing, resand8ng and sealing the whole area.

Fill the gaps with paving sand then dribble PVA block paving sealer into them. Sets rock hard.

If you are using DHCP on the BT router to allocate your device addresses, rather than static configuration, the BT router will have a record of the IP addresses that it has allocated to your devices using DHCP. When you remove the BT router, if the physical links to your devices stay up then the...

Have you thought about how you will handle the IP addressing issues that will result when you change the routers over?

When I rewired my downstairs RFC sone years ago, I found a load of old lead sheathed T&E left from the previous rewire!

Try finding an SFCU that is not double pole.

Yes, I said that 5 posts above

I can clearly see two cables - the vertical one that is probably the feed in from the street and the other that looks like SWA exiting from the bottom of the cutout, which could well be a loop out to your neighbour. Can you get to look at your neighbour's cutout and meter?

Change the label!

After the cog do you have a three dot icon bottom right? If so, try that

Try menu>settings>all settings >programmes >programme tuning and settings > auto tuning.

I didn't have any trouble getting mine to go back in after I'd thoroughly cleaned the edges of both the manhole and the cover. If you ever have the paving re-sanded, tape over the gap between the manhole and the cover first or you'll have one hell of a job to get the thing out again!