Search results

Hi, no sockets, just wall switches, 6mm for the hob, and as luck would have it, there was a disused immersion 2.5mm which was long enough to pull back from the old airing cupboard, drop down the wall in the kitchen to the switch for the oven.

Wow, sorry for all this, it originally started out as a simple question!!! Am going to run a length of 2.5mm through the house somewhere. Thanks for all the help.

Pinned to the wall, outside, there is no easy way of routing the cable to the front apart from going round the outside, has fitted carpets throughout, with large sheets of wood for the floor.

Thanks, so what do I use for the dual, oven? Its 3.8kw, I assume 2.5mm is fine now, even for 12 metres, it will be outside all but 10 inches either end. 16A trip??

Hi, thanks, there is currently a 6mm which I wil use for the hob, I will run in a 2.5 for the oven, that is a dual oven though. What trip do I need? 20A?

Hi, thanks for that, so what size trip do I use to put them both on the same radial circuit with 6mm? I assume I can use 2 seperate control switches, so I can isolate each seperate appliance?

That makes it 10.6kw, sounds a lot, what trip should be fitted for both?

Hi, having a hob installed in my ex's kitchen, the hob is 6.8kw, the dual oven is 3.8, so I guess the 6mm is way too small for both, the problem is there is a socket next to oven, thinking that could have been used, obviously it cannot now. Do I need to put a new run of 2.5 in, with a 32amp trip...

Hi, anyone got the phone number for HRPC? My switch knob has a broken shaft too. Thanks. Hugh.

Hi, I have this problem too, its the heat exchanger that has gone leaky, its £50 from ezypart, but then you need someone to fit it who is Corgi reg. Hugh.