Search results

how's he going to get a dedicated supply from the hot water storage cylinder? essex flange?

is this how it is now?[/img]

is this a rubbish drawing of what the pump is now?

I'll upload some pictures tonight its not a filter, if I couldn't tell the difference between an in-line filter and whatever this is I shouldn't be doing plumbing, 4years of college wasted.lol.

Don't turn off any appliances without been able to check your gas installation for soundness, the gas isolation cocks may leak once disturbed and when you turn a light on in the morning the bill will become the least of your problems, which cloud to sit on will be instead.

Removing all the radiator thermostats in the house and putting the room stat in the freezer will not cost you that much, my heating is on from 6am till 11:30pm at 23 degree with boiler at a flow temp of 65-70 365 days a year, £60.00 per month all rad stats on full double glazed 3bed terraced no...

Water on PCB has probably blow a few components within the boiler i.e the fan and possibly the gas valve or air pressure switch etc.(pandora's box) the gas valve might now be faulty too, or the regulator on gas meter is knackered and can't supply enough gas, heating might work okay! Fan may not...

Yes the direction of flow arrows does help to indicate which side would be safe to open after isolation but also, if you look inside the service valve one end has a strange shaped partially coned perforated metal disc(best I can describe it sorry) which apparently has something to do with water...

I wouldn't recommend it, not sure if it could handle two running outlets at the same time, and it will pump over into the storage cistern in loft via the open vent wasting hot water. Its just not designed for that purpose.

I have seen this done, the shower pump is a stand alone unit tank fed cold in one side pumped out on same side and hot water in the other with pumped out on same side. You want to plumb it in so the entire hot water system is pumped right?

Sure you don't have a small gas leak that you can't smell, just wondering as you said you had a large bill out of the blue without really changing anything substantial like electric cooker to gas etc.

Yes always best to replace donut washer 50% of the time it won't seat right again.

Some traps have a plastic washer between the cone washer and nut! McAlpine have them without them the waste pipe just pulls out easily! They go missing from the packs very often in my local plumbers merchants!

Might be venting the coil on cylinder! Just replace where it is!