Search results

  1. hanns21

    Magnaclean Micro2 Vent-stuck?

    So because you read up on the topic you're a expert! Its people like you that tradesmen hate doing work for. No doubt ul be on here again in the future to fix your boiler because you read somewhere how to do it. A bit of paste on the vent is not going to stop your magnaclean working. Catch a...
  2. hanns21

    Magnaclean Micro2 Vent-stuck?

    Its been installed for four days? Why are you even messing around with it? Why are you trying to vent or even open it for that matter? Also The magnaclean doesnt need vented. Stop messing with things you know nothing about! And im sure when it starts leaking you will blame the installers!
  3. hanns21

    Boiler has no isolation valves

    Flushing a open vent system with mains is a pain in the ass. And if your not sure what your doing the simplest thing you can do is take each radiator off one by one to outside and flush a hose through one of the ends of the rad. Should get your rads nice and warm again
  4. hanns21

    worcester 24i combi difficult to light..

    How fit is your wife?😂
  5. hanns21

    At my wits end!! Valliant Eco Tech Pro 28- No Heating....

    Sounds like the stat is faulty. Test for 240v at the lr connection at the board. Or link out the stat by putting a wire between lr and ls. If your heating works youf stat is faulty. Also you have overcharged the vessel.
  6. hanns21

    Worcester Bosch 28 CDI Building up pressure.

    I would need to know your boiler to help you. Try the top of boiler down the back if the makes sense
  7. hanns21

    Bubbling in f&e tank after refill

    The bubbling is air in the system because you drained down. You have air in the coil of your hot water cylinder.it might clear itself it might not as for your rad not working try turn all other rads off and see if it heats. Failing that it might be a faulty rad valve or again air. Take the rad...
  8. hanns21

    Worcester Bosch 28 CDI Building up pressure.

    Expansion vessel either needs charged or is faulty
  9. hanns21

    Help ! Corroded heat exchanger, boiler condemned

    The ferroli domicompact. ..peace of ****. Your condess on right hand side of secondary heat exchanger is also leaking. And a nightmare to fix
  10. hanns21

    (Hopefully) Redoing CH with PEX, need advice

    I use qual pex in all the new build a do. Tested to 10 bar before. Plastic is fine, just don't use any unnecessary fittings and always use inserts. If your using it on plumbing always fit a pressure reducing valve.
  11. hanns21

    dont know how to access my toilet cistern...

    All work to the cistern is done from the top panel that the button is on. You need a new syphon for the toilet to stop the flow of water into toilet. All you do is put your hand on the syphon and turn anti clockwise and it will come out. Bring it to your local merchant and get similar...
  12. hanns21

    Potterton boiler not starting

    First thing is if its a presurised system it wont work unless the pressure is topped up. Secondly a gas engineer knows how to do his job and doesnt want you guessing to him how to do his job! You wont get much help on here from anyone when its to do with combustion.
  13. hanns21

    Vokera compact 29h Not igniting.

    I know , i know , i know. But cant tell you as its to do with combustion ;). Its a straight forward cheep repair so get a gas safe engineer. No one on here will tell you sorry
  14. hanns21

    Ceramic sink no hole for tap?

    Ive never seen a belfast sink with a tap drill in. It either bid taps over the sink or a tap drill on the work top next to the sink
  15. hanns21

    Ignites and then flame out. intermittent. Baxi Potterton.

    This is not a diy fixed, sounds like the banging if the gas build it. Need a gas enginner in to check gas setting. etc
  16. hanns21

    Help - Ariston MicroGenus problem !

    No worries. With your boiler firing off and on the air pressure switch is switchinv off and on. So not enough air for the switch to work. With you having to top up once a week it sounds like a small leak tho i engineer will be able to find the cause easy enough. Hope this helps. Cant give...
  17. hanns21

    Help - Ariston MicroGenus problem !

    You have a air flow. Problem and either a leak or a new expansion vessel. Both a cheep repair. Get a gas engineer in instead of messing with things that can become dangerous
  18. hanns21

    How to dismantle kitchen mixer tap? (quarter turn)

    They are usauly screwed . Wrap a cloth around it and put ur grips on
Back
Top