Search results

BAS - I don't know what you're trying to assume, well I do but don't appreciate your comment as I did not install the units myself The units were originally installed 8 years ago when I refurbed the kitchen to let out the property I have since moved in and decided to keep the units as...

yes as I mentioned before, I have a void of around 100-150mm behind the floor units, I will be able to pull out what's already channelled & move it across 5/600mm, then up the wall behind the units, channel in from where it becomes accessible from above the worktops & install the switch inline...

I didn't mean to convey the cooker is built in, the cooker is a standard 600mm width freestanding cooker I would be happy to move the cooker switch, put a joint in it to ensure it's in the correct place and easily accessible but I really do not wish to take the wall unit off, I am sure they...

Despite the length of time taken & the extra work entailed I would prefer to do it 'properly' but now I'm getting conflicting info EFLI says So put the Cooker Switch above the work top, spur off the FCU and then flex from the chimney into the FCU, but then comes all the issues with the...

Back again! Please see the diagram below, showing the new proposals to ensure compliance as per the spirited discussions that have led before Hope this satisfies all Btw, I'd really like to know, how wiriing, embedded behind tiling and mostly behind a splashback (which will never...

Yes as I have space to feed the PVC conduit in order to protect and make it even more visible behind the floor units, there is a small gap behind as my units aren't 'standard depth' so there is a void of around 100-150mm behind all the floor units, and as I am replacing the worktops this space...

I have taken the comments on board and have amended the diagram I forgot to mention that the space between worktops & units will be tiled (as per the green lines), I also omitted the fact there's a gas connection on the left hand side of the cooker space, would this affect any cabling running...

I'm installing my cooker hood this weekend and would like some help please I have attached 2 diagrams to show what I am proposing to do Fig 1 Fig 2 Which of the 2 diagrams attached would be an acceptable way of wiring the cooker hood in From reading a few posts in the forum...

anyone? Any ideas please??

Hey guys, sorry for the delay Here's some images of the enclosure Image #1 is of the enclosure itself, the circled areas are the sections from where the enclosure leaks Image #2 is the trim I've been referring to & what the door seal catches on Image #3 is where the...