Search results

  1. A

    thermostatic shower and (supposedly modulating) combi boiler

    i thought because the tap is on so slow the water has a very small flow rate through the boiler hence why its very hot and varying, also thought that some thermostatic showers can not be run direct from the boiler. thought i would post this as no one else has replied and i might be talkin...
  2. A

    Sime 102 Deluxe

    yes switched back to CH
  3. A

    Sime 102 Deluxe

    no takers yet then...................
  4. A

    wireless alarms

    if u have one its junk if you dont have one yet they are all junk and are for muppets
  5. A

    Heating a garage conversion

    i have pipes running sealed in concrete for years, i didnt do it but have never had a problem, but these days i see channels being run through and a small section of ply to cover them as you never know i guess
  6. A

    Baxi 105e pressure rising - wierd!!!

    Thinking diy hmmmm The divertor valve i guess would be the only other mechanical path for the water to cross over, and i guess the pressure is increasing close to the mains water pressure level, so if it aint the filling loop which if its external then you could disconnect it to prove the...
  7. A

    Sime 102 Deluxe

    Problem - central heating will not switch off summer/winter position has no affect no room stat turning boiler rad stat has no affect as CH keeps going removing room stat link has no affect removing summer/winter switch has no affect Hot water comes on fine. what you think? pcb?
  8. A

    Potterton Lynx 2

    Corgiman???? once i find my DVM, thermistor resistances how do you want them, boiler cold , or hot or it wont matter as long i tell you what state yes??? ALso is the pump supposed to boiling to touch (heating still works fine) New addition is it makes a noise with hot water sometimes...
  9. A

    Potterton Lynx 2

    H/w is fine pump works fine C/h heats up fine (except noise in boiler) system well its cleanish been about a year and half since last full clean out as for the thermisters i aint checking em now will do it tomorrow and let you know.
  10. A

    Potterton Lynx 2

    nice and helpful i see!
  11. A

    Potterton Lynx 2

    Hi Potterton Lynx 2 makes some banging sounds, sounds like air lock somewhere , this only happens when heating is switched on, i have been told it maybe a problem with the auto air vent valve which i have a new one will replace at some point, any ideas on anything else it could be. I have...
View older results
Back
Top