Search results

You got ripped off if I did that repair it would cost £250-00 I think the pump has air locked check the pressure first when cold should be 1.2 bar undo the screw in middle of pump let water out for a couple of secs then do up see if that makes it run better if not new pump. Bob

Grant 26 kw external and if you want to be really modern put in an unvented cylinder as well. But if you want run the old boiler till it busts then replace. Bob

Change the outside tap for one with the valves in it job done. Bob

I put mine down on 18 mm ply then a couple of lines of sticks like xxxxx never had one move yet or you can use silicone. Bob

I’d fit a tiger loop it’ll help your oil pump. Bob

Good call mate could be frost stat u/s. Bob

Depends what oil pump you have if it’s a riello 6 Mtrs no way if it’s a danfoss then 2 meters is doable I don’t think any pump will lift 6 meters without a tiger loop. Bob

Not nice matte lad. Bob

A good description Bernard. Bob

Always good to get the stick out and give the duplicitous frogs a good thrashing. Bob

Photos please

Yes I realised that for some reason I got mixed up with a 2 port. Bob

I bow to your knowledge sir. Bob

Motor my predictive text again

Brown blue wires are mother grey and orange wires micro switch 240 to motor if arm goes across motor ok check other two wires if you get continuity they are ok. Bob

Yup not enough clearance I always give more don’t want a fire. Bob

There’s an air bleed on the vertical pipe the pump is on. Bob

Don’t forget to work on an unvented cylinder you have to be registered as they come under G3 of building regs. Bob

Everything wears out but if looked after and dosed with inhibitor and kept clean it should last a few more years . Bob

Yup ideal ok . Bob