Search results

very informative drawing, il post an equally detailed price later :roll:

http://cgi.ebay.co.uk/Oil-Rig-Model_W0QQitemZ6037064588QQcategoryZ4248QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

If the roof has 19mm laths he should have used the same thickness laths to lath up around the velux. !9mm laths were the norm on older houses but 25mm are the minimum thickness you can use nowadays. 19mm laths are still available so he has no excuse.

they dont seem to like an*l . substitute an a for the * obviously.

All the information and materials are here:- http://www.fluesystems.com/liners/info/flue_liner.htm

Used these on my garage roof and condensation was a big problem in winter. Some of the sheets came with a very thin fabric coating on the inside face, these didnt drip condensation but the fabric coating looked damp. I put polystyrene sheets up against the inside face of the roofing sheets and...

Boreas ignis is 7005 alloy with 1% titanium and 1% zinc added. Litespeed titanium frames here, priced in euros and heavily discounted cos they are last years stock http://www.totalcycling.com/ProductsList/mcs/CategoryID/59/GroupID/2/v/8eb19988-5b53-4567-b32d-85632ee93b1e :wink:

if you can get a titanium pushbike for £500 post a message and tell me where. You will be lucky to get a discounted frame and fork for under £1500.

If its Carls hearth you are trying to polish its gritstone not sandstone :wink:

Cost me £200 per visit with a basic sketch last time i used one- about 5 months ago in yorkshire.

there so ya dog can go and crap on someone elses land whilst you stand well away pretending you dont know whats it doing. I hate em too.

I would bring the new pipe in to sit on top of the salt glaze as you describe. You will then have to form new mortar benching around your pipe.

The reinforced underslating called monarfol is recognised by it being made up of small squares about 12mm square. These are formed by the reinforcing knitted into the plastic underfelt to strengthen it. Vent tiles should be put at the bottom and top of the roof so air will circulate.usually 3...

when you say condensation on black pvc sheeting, is this the sheeting under the tiles i.e. underfelt or has it been tacked on under the rafters. A reinforced plastic underfelt called Monarfol used to be used under the tiles in some properties which could cause massive condensation problems ...

A closure plate and clamp are what is used at the top of the liner then the chimney pot is placed over these. See here for more info http://www.fluesystems.com/liners/info/chimney_liner_components.htm They have full instructions in the top right hand corner of thepage, labelled...

As regards the plasterboarding around the rsj. I've just finished a barn conversion with several rsj's being used throughout and all have been double plasterboarded and passed by building control. Maybe there are different regs for commercial buildings.

Have they put the underfelt back into the gutter or has it been pushed back behind the fascia?

Cheers WoodyouLike. As you say, we have a few dark stains where the mortar was dropped. I will finish the work i have to do and give it a go as you suggest. The friend who lives in the house is treating the floor himself so i will show him this post. He,s on his hols at the moment so he will...

Today whilst we were fitting a large stone hearth in a friends house we managed to drop a couple of small blobs of mortar on his new oak floor. Despite cleaning it up almost immediately it has stained the floor. The floor was laid 4 weeks ago and has had 1 coat of hard waxoil and is awaiting...

if you decide to slide polystyrene between the rafters i would suggest you use Kingspan or Celotex.These are more rigid than polstyrene and more thermally efficient. Not an easy task though, ive had to do it on one of my houses in the past but only 1500mm of the roof was sloping and access was...