Search results

Are the ceramics solid ? Is it an asphalt sub floor or old adhesive ?

No just leave it down. Great flooring. Just don’t glue anything to it. Float wood over it no problem.

We just fill them white Dpm sheet and screed and insulation. But if not use quickstep incizo trim

Something going on underneath. Uplift and check.

You said you were tiling it ?

Get rid of the board you don’t need it.

It’s a anti slip flooring like polysafe No you need to uplift it. Cut into strips of 6-10” and pull up

Defo needs a coat of ardex na or Mapei na or fball 1200 pro. Are you doing glue down LVT ?

Waste of money so don’t buy it. You won’t have any sign of damp as a carpet been above it so it’s been breathing. Is the floor black or clean concrete. Are the skirting on ? Imo it needs a Dpm at that age property if it’s a ground floor.

Could go 6mm sp101 plywood and glue it down.

You get different backing and none are a complete vapour barrier. What tiles are down now ?

You could use Jumpax before the vinyl

No Dpm under that. So best way is plywood your floorboards. Then fill fire place with ardex na screed and a liquid Dpm

Yes. You can put more on if you want. So,e you put on neat but most of above you Dilute it 4-1

Floor primer - any of these Fball P131 Ardex P51 Uzin 360 Mapei eco prim T Or similar

Take out. Make good underneath with rapid repair screed if needed and fit a Incizo bar

It’s now pourus so dilute it 4-1

Chipboard .

Get some wood quadrant around the perimeter

Would a slope work. You could use stairrods shims.