Search results

thanks neo. theres no mark on the front of the sprocket but a small hole in the rear (oo err) .... So I just line that up with the top flat surface of the head where it meets the rocker cover on the front of the engine (ie spark plug side)?? i shall investigate the tool you speak of as I...

cheers jonny. It does have a plastic cover atthe top which unclips. It has a rear plastic cover behind the sprocket which the front part clips on to and is held on by the two rocker cover bolts nearest the sprocket end. However the the rear plastic civer is broken where it is secures by the...

Hi guys, just got a mk2 golf gti as a runaround and thought it best to change the cambelt before I go too many miles in it. The haynes manual section covers removal of the sprockets and cambelt in one go and therefore necessitates removal of the rocker cover. Anyone know if I need to...

I didnt realise that at the time. Sorry I'll trust your every word next time. thanks again for your help.

Hi Tony. Thanks for all your help. Changed the DHW NTC last night and seems to be working fine now touch wood. I spoke to biasi service helpdesk the other day to run it past them (they agreed with your diagnosis) and they were very helpful. I had expected them to say that I shouldnt touch...

cheers gcol. does the underlay that you buy in sheets serve as dpm or is it not waterproof?

I never watched before 82, but the picture and sound were still rubbish. I guarantee, look at clips of zico and co in spain 82. theres no disguising the fact that its abroad.

its a concrete floor. would that make any difference? is it still acceptable to board it?

As much as I love the world cup, is it just me or did it seem better when the picture was grainy, the sound was like they were commentating over the phone as opposed to picture and sound quality as good as if it were being played at old trafford? Or am I just being romantic? jim. :?

hi all, hopefully someone can help me to save me guessing and hoping for the best! I'm going to lay tile loc on the mother in laws kitchen floor, but first I have to raise half of it to equal the highest point which is existing ceramic tiles. I was going to use leveling compound to raise...

Hi all. I know I can trust you all to help me! I am goint to tile a whole kitchen floor. its about 4m by 3m give or take. It is half tiled and half carpeted. the tiles are ceramic glazed and stuck well down so i want to tile on top as its impossible to lift them. However, the problem...

these doors can drop. especially if they are fully glazed and therefore heavy. it depends onthe hinge type how you adjust them. On mine, there allen key screws on each hinge underneath where the hinge hinges so to speak. they may be covered with a plastic flap. screwing these one way will...

please dont paint it kitty. parquet looks fantastic when sanded and varnished. Its also a selling point too. You're not going to put up stone cladding outside as well are you?

its pressing 3 that charges you a fee. not the 1471. I'd stick to bt too. the differences arent much for most people. what you lose on the swings you gain on the roundabouts. there might be a few variancies. all this confusion and scepticism is down to one thing. regulation. BT arent...

Hello Tony. Had it in diagnostic mode. 3 leds. green red green. Left is visible through viewing window as you previously stated. when heating on. the two greens flash together in sync on/off every second. when hot water being called for they flash at the same rate, but alternately...

Hi Tony, I lifted the top cover from the pcb. I couldnt get 1 screw ouy as it would mean removing the pump. I cannot see any led's on the pcb. its dark in there, but nothing lights at all. not when the heating is on or when calling for dhw. Jim.

hi tony. i've not forgotten. i just am working away all week and this isnt really the type of thing i can ask the wife to do. Now if you asked me to check how to spend loads of money on clothes, shes your woman. As soon as i am back and able to do so, I will run those checks. thanks again...

just done it! piece of pi... cake. the old pads probably had another 5 thousand miles in them, but once i'd got round to doing it I thought i'd might as well carry on. thanks for all your help.

Tony, what you are saying is right. When it fires up sporadically, the led does not glow. It does not appear to be firing/pumping at regular intervals such as the pump working every 24h to stop it seizing. I've just got out of the shower (the timer is off so no ch) and its doing it now. It...

right. took cover off. when boiler pump fires for a few sec with timer off. the red light does not come on. whne I turn the blue tap. it seems to do it slightly more often I think. i can hear a relay click every time it turns on. by the way, washing mechine is not on same water supply. and...