Search results

We wont touch them with a barge pole after what they told a customer under contract (monitored) to do with his Prem after a CIE fault. Shame, good panels.

How are you adding them? With the system powered down, then re applying power? What happens if you swap the keypads around? Does the fault stay with the location, or the move with the keypads?

tripping both detectors? 51, 07, 1 = enabled 51, 22, 1 = on That should be it. Tried a restart lol?

Are you in the trade so to speak>?

You need to enable it through engineer

Zone 4 was at fault (open circuit). (that's what the bleeps tell you when you tap in your code, 4 bleeps = zone 4 open etc) Absolutely no need to crash as already stated.

Accenta G4 will fit, pretty much the same :)

The RF fob (KTC805) works with RF portal.. This will set/unset/part set and night set the system. is this not what we are talking aboot?? :)

bit *****, but you can..... However due to the extra loading on the bell panel output, i'd suggest running it through a relay.

hope you have one as SAB and one as SCB, or you may blow the panel op. Also tampers need to be in series, and especially with Texe boxes connected a certain way. Good luck :arrow:

As above RF fob will work with Portal, we have a few G2's with this set up

Power it down (mains), remove old battery, replace with new battery, on power up it should silence with user code. Replace lid, turn on mains to unit, press reset, jobs a good un

The like you can buy in B&Q are crap, but the proper stuff is good. Hybrid stuff by Honeywell is excellent we have lots out there on G2 Galaxy and GD systems, never give any grief. Texecom Ricochet is also good by all accounts, but don't have first hand experience of them (yet) * By hybrid...

^ LOL! SMS coms is iffy at best

Replace por a 9651 uk ;)

Fair play after today i'd agree! We do a lovely Gal 60 in Altrincham on a domestic. 40+ sensors, Classic pretty tidy tbh. Take over a year or so Just got back from wiring the extension, ffs!!! Builders have hacked most of the ceilings down at the rear of the property, the tidy job on the...

Yup, any domestics I always bring the battery to them when I get the docket signed, shows installation, tests etc. They can even trace it through their paperwork if needed then. We change them at 3-4 years. Still :lol: at him charging that! 24 hour availability? ;)

Just get ADT to run the wires in. We (not ADT) dont like connecting to cables run in by 3rd party builders, they are usually run with mains, sited in wrong corners etc etc

so how have you wired the tampers back to the panel, they need to be in series.....? If you have linked out the tamp and the bell tamp, what reading do you get for the keypad tampers?

I thought you were 14? Christ £80 is what we'd charge and we are NSI Gold!