Search results

  1. 9

    Gate Audible Sensor

    Yeah we use these (much of a muchness) http://www.optex.co.uk/site/temPW3_001.asp?intPage=1750&intLevel=6 Best to hook into an existing alarm, then prog as a 'chime' point. Or it can be made standalone with a small PSU/timer relay to switch a buzzer for instance.
  2. 9

    What is max height a fire alarm panel can be installed.

    There is no specific height for the panel. Manual call points should be 1.4m from ffl to centre of unit +/- 20mm.
  3. 9

    ADT Alarm Honeywell CP038 Grade 3 Class II

    You could try and replace the batteries, but i bet it'll lock out into call engineer ;)
  4. 9

    Upgrading system - shock sensors to pet immune PIR recommend

    One thing I will say and its not very often with Texecom, their prestige pet sensors are cack, very poor pick up.What a tool I looked trying to set one up in front of a customer! Binned for an i-wise
  5. 9

    ADT alarm - not sure what's been done.

    And I don't think you'll get many answers with attitude above. Galaxy is a professional panel, not diy..... To default one is not listed in the engineering manual for good reason........ ;)
  6. 9

    Scantronic 9448 replaced battery and now doesnt work

    Read the manual you have ;)
  7. 9

    Scantronic 9448 replaced battery and now doesnt work

    if you have back lights, but no beep from button pressing the AUX fuse has blown. Seen it many times on poorly fitted/overloaded systems.
  8. 9

    Scantronic 9100 Expander part no 9124

    Just repace it. Been obsolete for years, bung in a 9751 with a hwx if need be, search them on ebay, not too expensive
  9. 9

    ADT alarm - not sure what's been done.

    Just get a company out to reset it properly. We could do that in an hour with a full service for the price of a call out So for the sake of £80 or so it'll be working no hassle
  10. 9

    honeywell keypad

    Bell is correct. (assuming all tamper switches are shut) You now need a multimeter, and a pic of the FRONT of the keypad to see if its compatible
  11. 9

    Alarm repair help

    Your not supposed to mix really however, we have lots of iD still out there. ADE stuff like Karizmas and Ultimates, seem ok with a mix. Menvier stuff we have, if its iD plus marked, (iD nodes and 690 iD's) they will also take a mix. If its earlier non plus marked Menviers, they wont read the...
  12. 9

    Accenta 6 Burglar Alarm - No Code

    There used to be a LCD that we fitted on a years ago, but never seen any for years. Current G4 lcd's wont work as far as i know. Are you sure you have the right manual, they really are a piece of cake. PM me with any Q's if you like, i can programme them in my sleep
  13. 9

    Alarm repair help

    Like hens teeth getting the old white original iD biscuits. You'll be very lucky if you find any on t'internet
  14. 9

    HSA6400

    flol! "Yeah mate, its sound" When we get involved with stuff like this, insurance asked it to be serviced by an approved firm, and will ask for a copy of the report? We walk away from most as they dont conform to even basic standards. (like yale ;))
  15. 9

    HSA6400

    Who's going to test this alarm annually?
  16. 9

    Concept Alarm not charging back up battery and general?'s

    Sounds a bit high that, got the right value resistor in there?
  17. 9

    Concept Alarm not charging back up battery and general?'s

    Bet you could peel an orange in your pocket!? Seriously not worth the hassel doing what you've suggested. Just bung in a Optima G4, pretty much like for like! Half a day to swap/commission tops longs there's no wiring issues.
Back
Top