Search results

Hi there does the dishwasher go into any sort of ubend water trap to stop smells.

It could be worse it could one of those floating selves fitted onto a stud partition wall.

I,ve had the same problem for a while so i made a utility room with a concrete floor and now its fine you cant hear it through the door either. I think its a good idea diy_dave1978 coz it used to do my head in.

Did you sort your issue out chris.

Hi Chris have a look at Heating Innovations Ltd info page they make panels for various options the H3 panel sounds like what you are loking for give Mike Smith a call top guy he will sort you out. Hope this helps. Andy.

Hi indigofish have a look at Heating innovations Ltd H2 Panel have a chat to Mike smith a really nice guy with 30 plus years of solid fuel knowledge. Hope this helps. Andy.

So called trades people who do work like this should not be near any tools, theres no way he is a carpenterthats even a ****e diyer you need to get your money back.

They do look different sizes some of the old flexi pipes where slightly bigger especially on older machine,s i kow you said it was a tight fit but is there no way you can by a washing machine waste pipe extension kit which comes with a jointing piece, then its all new and same size. The water...

Are you talking about the actual ribbed waste pipe on the washing machine, i take it that is the one you have extended why can,t you just install the machine like for like. Pictures would be good if you can. Andy.

Just replace the the old valve with the new one using the old nut and olives PTFE will be fine but do it around the olives not the thread, nuts should be same size half inch BSP. Andy

Get a Cat.

I used to hate fitting those wall hung basin,s customers never thought where the pipes would go stud walls are ok coz you can just cut a section out and replace afterwards, best bet is build a stud wall if its possible.

I was talking about the incoming water pressure as it does have a pressure reducing valve on the incoming pipework.

I think your spot on there stem the old oil with all the cruddy carbon in it as the oil gets older it will quieten down.

could you take the pipe work off after the stop cock and put a pressure gauge on so you have a starting point and make sure the pressure is ok, then you could put the pressure gauge on the pipe work after the stopcock and see the difference, it gives you something to work from.

It sounds like they have reduced the size of the incoming water mains somewhere or from the incoming mains to the island, if the pressure was ok before they moved the mains it has to be something to do with it.

People are forgetting the fact trump said its a temp ban.

Now i,ve had a look at the picture of the pan it looks like a syphonic pan looks loke the syphon in the cistern is for a normal toilet.

Thanks Nige the symtoms sounded like a syphonic but the syphon didn,t look right hope the info helped John.

Hi again John from the picture it dosen,t like a syphonic that looks quite a new design syphon a syphonic toilet pan is different to a standard one does water flush from the pan if you pour a bucket of water down it, have a look at the picture the curves in the pan itself. Andy.