Search results

Engineered flooring is good.

400mm 9.5 plasterboard 600mm 12.5 plasterboard. Andy.

Yeah do as gigz says or if you are an old fart like me who use to lead weld we use to remove the gland nut get some string coated in petroleum jelly (vasoline) and repack around the shaft its old school they call it a stuffing box EE that takes me back. lol Andy.

Looks like asphalt to me same as what was used in most terraced house,s when people wanted to lay lino or oilcloth as it was self leveling, ish you prob find there are stone flags underneath it, which were not even enough to lay onto. Hope this helps. Andy.

Most laminate floor can,t be laid over underfloor heating check manufaturers flooring info.

You could always let the guys who are plastering put the boards up.

I was just trying to be polite noseall lol.

You really need to replace the whole tap as just replacing the top section prob wont work as it all wares together, also if you replace the o, rings but not the plastic locator it will still leak as that wares as well, its job is to keep it from moving from side to side thus let ting water past...

Type in STOVEFITTERS all the info you need is on there you could also give them a call to help. Cheers Andy.

All depends how much you have to do it will be more expensive with no more nails dot and dab is the best way and it wont come off, its specially designed to create a suction on the board, it can be messy but once its done it will be solid. Andy.

Ok just make sure they touch the armature (not sure if that,s spelt correctly) and make sure the slots in the copper core have no crap in them, if all that,s ok must be the cable. Hope this helps. Andy.

Why not just use plaster board screws i we just use 35mm collated in the screw gun but you can use single screws, they will be fine even on fireboard which is 30.7kg. Andy.

Prob carbon brush,s inside

To be honest I didn't want to fit an unvented cylinder as I cant fit it myself.

I apologise for yesterday's rant over the silly comment's I received.

Your right Agile its not a nice thing to say to others in the trade and I apologise but is it any nicer for tradespeople to comment in a way that puts genuine people off asking a serious question. I had five replys until I received a decent question. Some of these needing help could be future...

Sorry gorners had a few beers last night thats why the spelling was **** i just don,t like useless comments when someone asks i genuine question. Every heating system produces sludge it just sits in differrent places thas all. I would think that if its flushed out properly it should be ok. I...

Just as i thought no comments from the people from this morning nice one.

Thanks Rodger i,m looking at mains pressure hot water from different heat imputs but whats really ****ed me off is the fact when i asked for info all i get from so called experts is crap comments, thats ok when people on here asked how to sort their **** out on a tour of IRAQ then i,ll take the...

I,m just wondering were the popcorn people are now, is it the fact i,m in the trade as a plumber and the so called experts on here can,t get away with stupid comments coz i don,t like stupid comments and they can,t deal or want to deal with a non DIY guy because i,ll be honest i just asked a...