Search results

  1. P

    Noisy sink emptying

    Difficult access to measure, will it be 40 mm under a sink?
  2. P

    Noisy sink emptying

    Thanks Rob, I'll get one from my local PM.
  3. P

    Noisy sink emptying

    Waste exits the wall and runs 6 feet to open drain, shared with rainwater. Is this suitable? Thanks https://www.ebay.co.uk/itm/254713445752?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649&mkcid=1&mkrid=710-53481-19255-0&siteid=3&campid=5338793847&customid=&toolid=10001&mkevt=1
  4. P

    Noisy sink emptying

    Thanks Andy, outlet goes direct to open drain, all clear and clean
  5. P

    Noisy sink emptying

    Thanks, I've removed everything and cleaned out all traps and pipes. Outlet goes direct outside to drain, nothing else connected. Would this help? https://www.ebay.co.uk/itm/254713445752?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
  6. P

    Noisy sink emptying

    Worse recently
  7. P

    Noisy sink emptying

    Both the kitchen and bathroom sinks have a loud gurgling when emptying. No sound at first but loud at the end of emptying. Neither seem to have vents on the traps, is that the cause? Any fix? Thanks
  8. P

    Worcester DT10RF Programmer

    Having trouble programming my Digistat DT10 RF When I set it to use 4 events per day (2on 2off) the time to set the first event will not go past 0829 when I try to set it to come on at 0900 or later. If I change the option to two events (one on one off) it works. But I cannot therefore have 4...
  9. P

    Newsprint ink stains on wood table

    Thanks for that. Is it mixed to a paste, rubbed in and left on or removed immediately?
  10. P

    Newsprint ink stains on wood table

    Hi I read newspapers on my solid, light wood kitchen table . Over time the ink has stained a large part of the table and has become ingrained in the grain of the wood. I've tried "orange oil" which had minor success. Any suggestions without having to sand the whole table? Thanks
  11. P

    Security lights recommends

    Thanks both Will get sparks to fit a PIR and flood
  12. P

    Security lights recommends

    Need to install 2 outside pir security lights overlooking the rear garden, can anyone please point me to a quality light which will not be triggered by leaves, branches etc. would like to know what to order from my local electrical supplier(hate "sheds")! Is the maximum permissible 150 watts and...
  13. P

    LED under cabinet lights

    Ps Just seen Screwfix have several ranges, any recommends?
  14. P

    LED under cabinet lights

    https://www.ebay.co.uk/itm/LED-Linkable-Under-Cabinet-Shelf-Lighting-Cool-White-Kitchen-Strip-Light-4-22w/321852865875?ssPageName=STRK%3AMEBIDX%3AIT&var=510797292803&_trksid=p2060353.m1438.l2649 Thanks These are the lights if that helps
  15. P

    LED under cabinet lights

    Hi, If I fit several led lights of different lengths under kitchen cabinets, ie: 838mm long at 13 watts and 277mm long at 4 watts, will they give out the same amount of light or will one appear brighter? Want to create a uniform appearance. Hope not a daft question! Thanks, Paul.
  16. P

    Refelting shed roof

    My shed roof is starting to leak slightly . The felt is generally in good condition,just worn in a couple of places. Do I need to remove the felt or can I lay new felt on top? Thanks
  17. P

    Pir external security lights

    I need to fit several security lights at the rear of the house, preferably with built in sensors. There are several small trees/bushes within 20-30 feet and a large magnolia approx 20 feet high. Can any one please advise which type of light to fit which will not be triggered by the trees moving...
  18. P

    Priming old walls

    Thanks, I used some primer on the plaster and filler as you advised. Will see what happens with first coat of emulsion if SWMBO ever decides on the colour!:unsure:
  19. P

    Priming old walls

    Bedroom with walls of 2 different colour old emulsion, after stripping wallpaper. !'ve done quite a lot of filling, sanded well and washed down. So I have patches of white filler,old blue (looks like eggshell emulsion) and old beige with some patches of blue beneath. Will be finished with matt...
  20. P

    Lost feed to kitchen tv from VM Tivo box

    Hi again Lucid, Lost it again, I've tried analogue channel scan and first time install several times but it's not finding the VM analogue channel. I've also bypassed the splitter and fed the output from the VCR direct to the feed to kitchen, still no joy. Is it possible that the external coax...
Back
Top