Search results

Hello , I need to pull up a small area of my block paved driveway-can anyone explain to me the best technique for removing the very first block when all the blocks are pushed tightly together. Thank you

I am tackling the above job for the first time ,the stairs are essentially straight ( 11 steps) there is a 90 degree turn at the bottom ( 2 steps). At the top of the stairs the toilet is facing and a 90 degree turn to the left leads on to the other rooms . There is a fairly deep stairwell over...

Can anyone advise me were to purchase a good sturdy set of stepladders preferably with a safety railed workstation at the top. This is to be used for hedge trimming and will need to safely access heights of approximately 10 feet. Thank you

Stop Press Problem finally solved @20:40 hrs BST The fuses x4 were housed in an old steel box presumably dating back to the date of build ie 1964 located no more than 10 inches above the new csu and bearing the name Crown. Although always within my sights this bit of kit has always secretly...

10; If it turns out to be an mcb which I now favour as the strongest possibility my guess would be that either the lighting circuit has been burnt out or that the lighting fuse is elsewhere (hav'nt the foggiest where) and that this gizmo (mcb possibly) is a spare. 11; If this is an mcb it...

Continuation of summary from last posting 6;All power sockets are fine so at night We have reading lamps to light our way 7;My worst nightmare now is that the clot from Moben(allegedly) has wired my lighting to a 32 amp fuse and that this as possibly burnt out all my lighting circuits as a...

Update for all you good people out there trying to restore light to our home on this very dark Easter holiday. 1; the three fuse like gizmos are identical in appearance markings and colour (white) all three bear the same inscription ie B32 32/A 2;All three have a switch on the front and the...

One last time-can anyone out there please instruct me on removing cartridges from the wylex consumer unit.The one I ahave tried to remove seems to be stuck fast. Do they tend to become tightly fixed after time.Does anything else have to be removed from the consumer unit prior to removing cartridges.

:( I've tried removing one of the three components from the consumer board but it is jam tight also there is a small lug on the top right hand edge which could possibly be hindering or preventing removal from the unit. What are the other possibilities, could it be burnt out and melted -there...

Does anyone know if the wylex 3-way consumer unit Cat No 304 has replaceable fuses? If it has could someone please explain how to remove and replace the fuse as I would dearly love to restore light to my house. :?