Search results

I only ask as im ripping my bathroom out and thought id use both as belt and braces.

Nice. Looks good. Is that Hep20 pushfit? Did you just use isolation valves to kill the water or stop ends too?

Might also be possible to do that gable using a hoist/cherry picker hired for a day. https://www.ebay.co.uk/itm/Cherry-Picker-Hire-all-areas-/264918246481?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0

Looks like you're selling anyway unless that his for sale sign on your land ;)

Thanks for your help.

I think that makes your neighbour correct. Although, ive seen much more detailed boundary documents with a 'T' used along the boundary to designate ownership. Like this https://images.app.goo.gl/7KEHp7Ucxpot9uG88

Im beginning to think this must've been like this for a very long time. Is 2x4 ok to sister with or would you go with 2x6 and is my plan to sister the bathroom only to basically level the floor in there for a new bathroom suite ok? (i.e. from the block wall to the radiator side of the...

I dont know any of it for fact, its just my instinct from the photo. Best check with Land Registry to be sure. How long have you owned the house? Your solicitor should have checked at the time of purchase and possibly has it on record.

You were asking for opinions, mine is B. If you went in that garage with the white door and turned left, are you on next doors land inside the garage?

I'd say B, but this must be on record somewhere like Land registry.

But the base/sole plate of the studwall is hovering off the chipboard floor underneath i.e. it is practically level whereas the subfloor underneath it is not.

Ok, so Ive lifted a section of floor and everything looks ok to me. No cracked joists or anything, just that bracing under the studwall that looks inadequate to me. No other noggins for the whole span. First picture shows the bracing under the stud wall with the radiator pipe going up...

Im going to lift a section of board at the weekend and see whats going on. I suppose anything else is just guesswork. Bathroom is original.

PSX_20220309_134606 by nitro23456 posted 9 Mar 2022 at 1:47 PM An exaggerated drawing, but u get what i mean hopefully.

10 by nitro23456 posted 9 Mar 2022 at 1:28 PM Joist size measured from landing at stairs and spacing assumed from nails in chipboard. Photo showing deflection in centre of room with laser, that is the studwall between the rooms perpendicular to the joists which run underneath it. Stud wall...

Not sure as ive not lifted any of the floor yet.

Hi all My upstairs floor is bowing. Joist are 2x9, span is 4.5M, spacing 450mm centres. Chipboard P5 floor on top which Ive not lifted yet. House 20 years old. There is a studwall built halfway along the span. This stud wall separates the bathroom from the small bedroom and the centre of the...

Thanks both, thats really handy. I think the mistake ive made is that when wiring my other circuits for USB charge points, I've used the little rocker style switches with an LED like the attached and these need the ground wire for the little LED to light up? I've then followed this pattern to...

Hi all Bought a cheap camper that has 6x 12v LED spots wired into the ceiling liner but the previous owner has wired them off the main car battery. They are turned on by a wall switch in the back that has 3 terminals - live, switched and ground. I have now added a leisure battery and various...