Search results

Ok cheers ill change the diverter for the new one later see if that sorts it. Are you referring to the water in the boiler system? Is there a cleaner I could add after emptying and refilling?? The diaphragm in the 3 way valve was ok also.

Hi I have a baxi 105e instant combi. My issue is that the when the pre heat is on its heating the rads and the hot water is not very hot. I've turned the preheat off. But when a hot tap is turned on the rads start to get hot again and the waters only Luke warm and it seams to run on for...

I've just fitted an external expansion vessel after my internal one slowly packed up. Should I turn the preheat of completely or is it ok to still use? It's on a baxi 105e instant. Cheers frizz

Which way up should it go? Some of the brackets I've seen will only top mount with the pipe on top.

Has it got to be 22mm pipe? Or would/could you reduce down to 15mm?

http://www.hot-water-cylinders.com/Robokit-EXTRA-expansion-Vessels-12-Litre_p_4553.html would this be ok? do i need all the bits and bobs(technical term) or just the expansion vessel on its own and use the filling loop and prv on the boiler? or would this vessel only do...

Hi I'm looking at fitting a external expansion vessel to my baxi 105e instant Just after advice on which are best to buy. 12 litres. Would I need to fit another pressure valve or is the one on the boiler still ok. Is it best to fit on the flow or return fron the boiler. The boilers in...

Hi is there a product I can apply to the internal brickwork on my conservatory? Just looking for a protector/sealer if it's needed? It's staying as brickwork and not getting plastered. Thanks.

Good call thanks. I forgot all about that.

Ok cheers it's a baxi 105e instant currently it's running 7 rads in total. Only adding 1 more.

any suggestions on an external vessel to buy? cheers frizz

Yes I keep a foot pump up in the loft when it starts making a noise I know it needs pumping up. Been going on for a few months now.

I keep loosing pressure on my boiler. ( baxi 105e instant) After reading a few things it is most proably my expansion vessel. If I were to fit an external expansion vessel does it just T into the heating pipes? Out feed or infeed? Do I just let all the air out of The boiler vessel and...

Hi I need to add another radiator in my living room. Can I tap into the bedroom system above the living room? In the bedroom It's on 22mm then reduces to 15mm going to rad. Would I just extend the 22mm down to living room or would I be better going down in 15mm? Is it ok to run 2 rads of...

Ok conservatory is all done so that's not an issue. But I would need planning permission if I wanted to put radiators in there from the house system. Is that correct?

I've just had a conservatory fitted and was going to put a rad in there tapped of the house system. Does this mean I can't do this or I will need planning permission? I don't intend on selling up. And will be insulating and plaster boarding over the wall that will have the pipes on. Thanks.