Search results

In an addendum to this saga.. i was going to fit the aplliances myself over the break.. and now find there isnt a plumb or level plane to be found. Worktop is off horizontal level, units and dividers are off plumb by circa. 10-15mm top to bottom. I suppose i coule lose the square in the bottoms...

They didnt want to pay for that.. i'm pretty happy with the step at the back although the masticking was pretty awful.

Mate! Of course, of course! I'm not trying to catch you out here in any way :) If you look at the photos the decor panel is already in.. i did say i didn't think it would fit based on minimum requested clearance but that also includes the 5mm req for convection gap at the top. So atm the unit...

Hi again. Still waiting for everyone to turn up! I had a good look at all the appliances and the manuals last night and basically i have to say the fitter seems to be going about things the right way. Offered up the cooker and it's very very close to spot on. The manual doesn't call for fixing...

Also.. quick q. The gasket that comes with the cold units.. exactly how/where is that placed? Just seems to be enough for one side and i can't quite make out from the instructions how to place it.. it seems to lap around a corner somewhere.. is it just to cushion where the hinge side is screwed...

Hi all and thanks again for the contributions. The washing machine fits fine now that the gas pipe is out. That had previously been transecting the cabinets somewhere not very far back of the midway point and they had tried to talk me into leaving it. Also.. the boxout on top of the worktops is...

Right.. installed that SketchUp program.. and here are some photos of current state: Will be out now till 8 or so.. cheers!

With what you've told me about the appliance door covers not being larger than the 600 of the opening i can comletely see why it would help to have the dividers brought forward. I'm just a bit surprised since it seems less tidy or forgiving than the way drawers and cupboards are finished where...

Thanks again for the fulsome reply :) Ok then.. so i'm assuming wrong in how integrated doors should fit. With all you've said.. i need the side panels on the outside of the fridge and freezer to be brought forward the thickness of the door and also the dividing panel.. so that the doors when...

Thanks for the reply. I'm not a ukip fan either but yes you have to be able to communicate and also, especially if not confident or used to fitting these appliances my iftter needs to be able tor read the instructions, which he wont. Regarding the doors themselves.. my thoughts were that...

Hi all. I've currently having the kitchen refurbeed with fitted units and could do with some pointers to make sure it gets done right. This is the seecond go at it as first install they bodged it by firstly not removing a dead gas pipe and butchering cabinets to go around it, then not leaving...