Search results

I agree with you on that note, they may be adding a few sockets in kitchen as well to run appliances in the evening.

Agree john i have asked customer to email me bills so i can if it worth fitting.

phatboy put a sock in it you are only competent to talk crap

spot on flameport https://www.tlc-direct.co.uk/Technical/DataSheets/Horstmann/BX2000.htm tlc have for sale i can pick up and fit.

Thanks john, looks like another visit to inspect their economy 7 setup and then make a final decision the customer wants to save money on bills and was told by a plumber that they can use economy 7 meter to heat immersion heater at night.

i know how e7 works but this e7 is wired different to usual which is wired together or a dual reading meter is used, in this flat the economy 7 is wired separately as for referring to cables as wires you can sleep on that thought, I am not asking for a wiring diagram, i was asking for ideas but...

Usually all the electricity used during the off-peak time is charged at the E7 rate, but the E7 consumer unit is only energsied during the off-peak time. First clarify the customer understands that 'evening' is not off-peak electricity. Retain the existing circuit from the normal supply...

hi, currently the immersion is wired to normal supply, however there is second consumer unit connected to economy 7 meter, customer wants to use economy 7 for heating the immersion in evenings, the hot water cylinder is fitted with a single element on the bottom. So my proposed solution...

I have a flat where 43mm pipe keeps clogging as drainage was not done well The drop slope is not good and water drain is slow apart from laying new pipe is there a pump that could be connected to pump waste water from shower unit ?

And let me guess your qualifications are BIG MOUTH CAN'T STOP TALKING At least I had the courage to publish my qualifications unlike you the big mouthers on the forums are always a waste of time

And let me guess your qualifications are BIG MOUTH CAN'T STOP TALKING At least I had the courage to publish my qualifications unlike you the big mouthers on the forums are always a waste of time

# simon it appers you have more time on your hands than work to spend time arguing when the op has not even bothered to respond.

Network + CCNA if you are looking for qualifications

it Op asked if he can share a network and phone line down one cat5 and I answered this is possible, I didn't suggest that is the best way to do it but if there is a reason as why op can only run one or one wire has only been laid then that may be the answer he needs gigabit Will function over...

I understand all that you said and you can keep waffling on !!!!!!!!

I will ask one question before i begin are you a qualified network engineer or a qualififed electrician, i am sure i know more about networking than you can DREAM of.

Yes i agree most computers have gigabit port but do you not understand that if your network is not gigbait backbone; meaning all your devices, cabling and incoming service, there is no point and all is just marketing bs.

Hi The ports are not correctly open otherwise it would work, you can check using dmz if your router supports this, if you are still stuck i can look at for as you are located in london. Saj

just thought id expand that there are two types of cat solid and multi strand. Also i use cat5 on many of my alarm installations, never had a problem yet.