Search results

what the silver casing?do i need to put HW and CH on?

I saw them cut pipe work above it and cut cable for old one to rewire new one. Saw old valve in box,are you saying they could have only replaced head on old valve. cheeky monkeys better not have :evil:

yeah I was in the room when they changed it, expensive I know :( will have to get them back to check it. thanks for help

Hi Mick, yes whole valve was replaced £250 worth of it occh . thanks for your patients with me.

forgive me brown wire was from cable coming out just checked BUT A and B pipes are still hot with only HW on? f*****g idiot ain't I.

3 port valve is wired into a round junction box brown wire from 3 port valve yellow/green wire from cable going to danfoss wb12 junction box? thanks for reply.

ok all warranty work has to be done by main dealer for sure.

10 rads on system downstairs rad + 1 upstairs in bedroom getting hot with ch off hw on. its a mystery to me

also brown wire is connected with yellow/green wire is that right?

hi mate yeah you're right sorry when ch on shouldn't B be cold vice versa if only hw water on A should be cold.

hi, m.o.t can be done anywhere doesn't have to be with main dealer.

hi please help,I've just had new 3 port valve changed because when hw on had 2 hot radiators 1 upstairs 1 downstairs was told old valve was passing by. Problem is had new valve fitted guess what same thing happens when hw on A and B ports ie pipes coming out are both hot shouldn't B be cold...

please help i've had boiler serviced after 9 years of not touching it and has always worked fine it's a baxi solo WM60/4RS.Since service the boiler is overheating the fella who serviced it did changed the gas pressure going into boiler i have spoken to him he said "it was adjusted according to...