Search results

Hi DX90 I had to fit a wylex plastic NH series consumer unit to a TT system 3 weeks ago, because there was no isolating switch, I tried to purchase a 100ma Time delayed RCD to swop out the main double pole isolator, I could not find one that was compatable with the NH enclosure, so I rang...

I had the same problem with a wylex board on a TT system 2 weeks ago, Wylex advised that the 100ma TD RCD had to be fitted in a separate enclosure and could not be exchanged for the main switch as shown in your photos.

Thanks Aardvark, I will look into that, but that will still require it's own earth rod w'ont it.

The main system is TT, the customer has requested a new consumer unit, currently the garage is fed by a 2.5mm T & E which I beleive is contary to BS7671, I intend to fit 100ma TD RCD main isolator. followed by a split load board with 30ma RCD protection, How ever the garage is detached and...

can someone please just clarify the earthing requiremnts for a stand alone garage when the main house is on a TT system. I believe I have read somewhere that it requires it's own earth stake? Thanks Guys

Go into your local MFI and ask them to print the users manual which should be on the storelink site, or photo copy a manual from one they have on display.

The diamensions quoted to you are from BS6172 2004 however these are normally only applicable to gas appliances because of a naked flame. The diamension for the wall unit to worktop is 460mm.

Could this possibly be a DIY Faraday cage