Search results

Hi, would this junction box that serves my 2 shaver plugs (in 2 different bathrooms) provide what I need please?

Hi, what about a humidistat extractor? These seem to come on and off automatically so won’t need wiring it to the light?

Vinyl, is that like lyno? Tiles or roll?

Hi, just taken up tiles and I am going to cover the chipboard with ply, what flooring options are there nowadays suitable for an small bathroom with just a shower in please? Don’t want tiles again. Estimate size is 1.4m X 1.2m Ta

Hi, I want to cover chipboard in a bathroom so I can lyno it (or similar. How thick should the ply be please?

Hi all, Pic one is the old Gainsborough shower I am replacing, I have gone back to the stud work and plan to install backer board and wall panels with a new tray etc. Pic 2 is the new type of shower we would like to fit. Watching plumber parts videos on YouTube he uses copper piping and a...

Hi, I have a tap at the side of my house but need water ideally at the front and back, are there more permanent solutions to effectively extend to the front and back without fitting more taps or running a hose along the floor please. Ta

Can the plug hole be installed in any orientation? If I spin the rectangular tray around it will be closer to the pipe it runs into, how far does the fall need to be please?

Evening all, I have finally ripped out my old tiles and shower area (U shaped) and plan on replacing the tiles with cement board and shower panels, my existing shower tray is about 9 inches from the floor so quite a step up, what determines how low I can install the new tray please? I can...

Well, seeing as I don’t understand but appreciate your replies, I will leave this one to the experts, or install one that goes off with the light (like for like).

Hi, I currently have a extractor fan that goes off when the light is turned off, if I upgraded to a unit that stayed on after the light is switched off could I get a permanent live from a nearby shaver socket please? All wiring would be outside the room. Thanks.

How long should it take to fill the system back up please?

Thanks, In the attached picture what does this tap thing do please? Does this turn the hot water up and down?

Sorted the leak thanks, it was a faulty valve. The header tank seems to be filling up now, I have the boiler on but the rads are not hot yet, the pipes near the tank are hot, does it take a while to fill the whole system back up?

Fitted the new isolation valve but that leaks from the bit where the smaller pipe joins the larger one. Have I missed something?

Not sure how to check if they have filled back up sorry, I bled whilst emptying and draining

Just an on off switch and a dial from 1 to 5 which I think is the temp

Nope, never seen one

Not myself no, this all started with a leaking rad (not on any connections) My boiler is a very old Ideal standard lx ff

Turned the mains water back on which is giving some hot water now but no CH yet, stopped the flow to the header tank as a temp measure. No tank in the loft