Search results

so how much would a sheet of exterior ply cost in comparison to a sheet of cement board?

anyone ?

what is exterior ply? excuse my ignorance :)

ok ive got a sheet of mdf which i am going to cut to size and then screw in place and then tile first question - can i just use normal tile adhesive straight onto the mdf? second question - what are the best ways to fix it on (i will be grouting it to bath and ceramic tiled floor) in...

well the boiler was serviced in november (by previous owner) so would his service be something under which he would have given a guarantee or something of the sort

so apart from fitting a thermostatic shower (which im not going to do) is there anything else i can do to help the situation

I have an ariston eurocombi and when i turn the shower on (mixer taps) it comes on and then pressure drops and it goes off, another quarter turn, back on, then off, another quarter turn, back on and stays on it only stays on for around 2 - 3 seconds so i know when i go in the shower i have to...

Thanks mate that will be my weekend job :-)

so i need to change the washers, are they a standard size or manufacturer specific?

my sink taps are very stiff to turn off, so stiff my girlfriend cant do it properly :-) anyone got an idea what the problem might be and if anything needs replacing then how do i do it?

ahh i see, right well i shall go ahead and seal them in then

the 200 excess is worth more than the bath probably :-) the bath is smooth on the underneath sides and has hairs on the underneath base so does that mean its made of both :s

nice one guys, its a very steamy small bathroom so its probably just that rather than outside moisture

i wasnt worried about it not staying white i was more worried about the adhesive not lasting and them falling off :-)

the hardest part is i cant get my hand behind cause its the wall side of the bath so cant seal from behind and also its like a small hole rather than a split i will be checking what its made of later though

ive just tiled my bathroom without priming the plasterboard/paint that was already there plaster was bare where paint had come off with wallpaper, will my tiles fall off?

ill check when i get home

excusemy lack of the correct terminology but here goes my bathroom has a window which has a windowsill and is set back into the wall. where the plasterboard joins there appears to be a metal rod running down which i assume is to achieve a nice edge. this has gone rusty and resulted in...

how can i tell what its made from, stupid question i know but this is all new to me

the previous owners have dropped the shower head which has put a split in the bath about 2 inches long and is a few mm wide and has been siliconed up although it isnt sealed which means we can only have showers short of replacing the bath can i get a patch for it that will seal it properly?