Search results

no mention of tarmac:cautious:

i wouldnt use ready mix if trying to match plus no dye just a bag of soft building sand and cement and a not too strong mix

put under its only too stop sub base and sub layer {ground) from mixing not for weeds they will grow in base layers also 50mm far too shallow as scalpings are usually 40mm too dust

Take a look online you can reprogram the key too the car unless bm tryed that had same promblem on my m3 Also if you have two keys keep alternating them or the batteries will go dead as charged by car

so still unvented then that must be a hell of a kick on the first tile they should of put small spockets on the rafter feet

i like the expanding foam to hide his cuts and that 4 x 2 is now a 2x2 i wouldnt walk up there

watered down emulsion would lift the grain in the skirting which can spoil the look unless that is what effect you want or best too use whitewash wax or liming wax

bit off subject but how is your roof vented

when i done mine last year had to have intu strips and linked smoke alarms no smoke seals needed

loose the newel in the wall that way you can square of your bullnose and can always be reversed

pop in here and ask for local roofers https://rslroofing.co.uk/exeter/

http://www.keymer.co.uk/wp-content/themes/keymer/docs/Keymer_2015_2016.pdf scroll through here to give you a few ideas also vent detail if you have noggings between rafter

anyone using cedral your best to get your self a guillotine no mess perfect cuts

as said above cheap (stanley,dewalt tapes from screwfix)or a decent laser measure and stabila or true blue (empire) i find the fatmax levels rattly

i work 8-4 and dosnt matter wether im 10 miles away or 60 i have to be on the job for them hours traveling is in my time

it would probley be cheaper and quicker for a new straight flight

http://www.willmottsreading.co.uk/ are very good but not sure how far they deliver

thats the underside of the block

i didn't vote couldn't care less but what i do know is people didn't vote to leave because of the eastern Europeans we need them (the ones that want to work) Europe are scared that they will go back putting there unemployment levels back up and stopping a lot of money that they send home we...

depending on construction normally fiber glass with brick slips stuck on with a fiber glass top flaunched to pot they normally leak around where lifting eyes are attached the lead should cover the cavity but have seen it done to just hide the joint between chim and brickwork which means it...