Search results

gotta be the kettle,i,ll have a nice cup before and after i,m done with the other power tool.

who is watching who?

he who lives by the blade shall die by the blade trying to annoy other drivers by putting your rear fog lights on to indicate there front fog lights are on is a bit silly,.. just pull your handbrake up hard that should sort out all of the lights for good.. good luck./

i was informed he was found guilty and got ten years. the judge in following up on the sentence did happen to remark "that if you were b_ _ _ k you would have got twenty years"

soilders get free guns./;' but soon start complaining when they get shot at,.

well if you miss you may shoot one of the speakers out?

is there anyway to make their RCD trip, turning the music off? Failing that, a .22 rifle. works on cats/

looking for a decent mix for setting fence posts(concrete slotted) i.e, sand,cement,chippings. have the sand and cement,

yes you need to get it inspected,before you start the works..

lick yer finger and smear it on to the inside of goggles you don,t have to spit.

All proposed electrical installation work in dwellings will need to be notified to a building control body before work commences, unless: • the proposed work is minor, and it is not in a kitchen or in an area classified as a special installation or location

if the work to be done is in the kitchen then no you cannot touch it. do the same as me pay somebody to do it for you. and wait six months for a bad job to be done.

whats the best thing to seal the cut edges on aquapanel after you have fixed the panels to the wall?

b&q do a nice easy to read leaflet on the part p law,

war = death. torture=hate

hang them then torture?

i need to extend my soil pipe to fit is it ok to use 2 x 10" extension pieces, the pan will be fitted to a flexi pipe then 2 x 10" extension pieces

you sure all this fuss is money orientated him not paying out again makes him go to court?

so how would i go about fitting an rcd inline?

is there such a thing as an in line rcd? so i could wire in downlights from the rose and put an rcd inline, in between the rose and the lights? i have the old type fuse box.