Search results

Heating components in east Kilbride or hrpc in glasgow

I fitted one about six months ago.google it should still be available

Has he went to the mv to see if that's where the noise is?some timber framed houses creak when reaching temp.you would think there was a ghost in my mums.may also be trv's wrong way round.try turning trv's on the rads when the noise starts.

I don't know how anyone can say if this is adecent price as he doesn't know what he's getting.could be a 35cdi with power flush and magna and upgrade all done nicely by a charity worker or a junior thrown at the wall no flush and a bit if 22mm when it may need 28.nobody on here can tell you...

Second vote for putting it in filling loop

This must be a wind up.if he is refusing? To tell you the model why would you continue.

Either pay or don't pay

most prob the venturi on the fan that requires the combustion seal to be broken.contact a rgi

try resetting the boiler (turn it off/back on) if its a solid red its usually a thermistor but may be the board.had the pressure dropped and you topped it back up?

i`ll do it for free as im desperate for work and am sitting by the phone waiting for yoor call.im on my way

yeah so he cant spell,whats the big dill? the guy in that first vid would have been better off using chrome pipe

cant see the front panel costing £23.the ones ive come across are with the lugs at the top not located correctly

ive been to a couple of these that havent been put back on properly causing the whistling,caused by the lug bits at the top.if hes started bending it and messing about with it he couldve wrecked it.as said when did it become bent?

its a combi boiler,the room stat has no bearing on your hot water,could be frozen conedensate or cold main.call installer and tell him.try reseting boiler first

A good curry should shift it

Cut it outside is fine

And I don't know anyone that can guarantee a vessel for 5 years after repressurising it.could last 5 days or 5 mins

Don't understand why the wouldn't re check it.doubtful it's the prv if it's holding pressure when cold.maybe get a second opinion I've seen guys repressurising the vessel wrongly

Ptfe the dogleg into the wall plate.make sure they are level and centred.the shower to dogleg will have washers.there will be a shroud to cover the threads not used.I would advise you to get a plumber in as it sound like your going to just give it a go.get a pump mate you won't regret it

Had one leaking out the screws at the same bit.I changed the full valve.