Search results

i wondered how long it would take for the troll to appear........ iif you read my post it says poc is not co....did you not know that???????? co2 is only poisonous around a concentration of 20% stick to licking windows

i agree also,i dont see how <300 from a door/window/vent can be ntcs but a rubber collar ar..must be to stop people poking them through 12" square flues and not bricking them up :D

products of combustion is not co but speak to your neighbour regarding nuisance..how close is it to your window? the fan pushes the poc`s away so it is either drifting by your window or freak gusts of winds would have to blow it in.Is your window above the flue maybe?

ah the old it gives me headaches one :roll:

theres a good chance they will leak when you turn them back on,drain down and remove or renew them

Slower than that

Run the bath tap slower

edit

how much did they charge for the pf or was it on contract? did they fit a filter?

seen it before,renewed the stats and bobs yer fanny

Does the heating temp get to 30 odd degrees then cycle like that?

yes,just make sure the glands dont leak when you shut them

check the pin on your cool rad,on the others though look inside the trv head and see if its shutting down as you close it

did the fitter check the pressure at the meter? Most likely cause is undersized pipework and the fitter should have taken this into account and given a cost to fix it

i have heard of people using universal seals,but technically a wrong seal is still I.D and you should be prepared for the next service engineer to shut it down again if they notice

yes but it will be a pita

check and see if the heads are loose, or take the head off and see if the internal is moving down as you close it

have you tried bleeding it?dont forget to top up system pressure. also check faq for balancing system