Search results

Hard to e plain my theory (30kw was just an eg)........ Basically if the rads are are oversi ed then under si e the boiler whick will inturn be working flat out, achieve the desired heatout put for the dwelling and be in condensing mode....

LOl would rather try to fix to wet plasterboard than a no- finds poured conctre wall tho. ;-)

It can be mate but i found that heatmisers linear actuators were cheaper. If you wanted to zone individual rads, then the are small enough to connect to the rad pipework under the rad itself. That just leaves a 2 core cable to get to them so no pipework alteration at all. Here you go ...

Happy Days

You are talking about the old hundred which was scrapped and re-designed completely (typical German engineering) Where as ideal just rectify the crap with more crap..... ? Why are you so asphixiated with IDEAL mate? Take a visit to both the factories maybe you will change your mind..

Lol you cease to amaze me. IDEAL. Is one of the worst Manufacturers out there IMHO Viessmann are a major manufacturer

Is that right!!! Define competent then please!

BG robbing barstuwards... The prob with you buying the mats is you will pay more than we will. Combi's are good but can suffer with flow probs when multi outlets are used. Unvented cylinder would be ideal as in the 222. The 222 is 1700 on its own but you get what you pay for. Pitty im too...

Nope Viessmanns generally cheaper... Wouldnt touch WB with a barge pole. VIESSMANN is the future

So have you now checked your case seals to ensure your family is safe?

No close it again.. YOu just want to take the pressure off the radiator.

JUst open the air vent into a bucket until it stops, close the valves and redo the jiont. Will be fine mate.

Foo Foo valve or the giggly pin maybe?

Id agree with mystery, however it sounds alarmingly like your about to attempt the install yourself?

9k bloody helll It all depends on your existing water flow rates. If you have good flow rates/pressure, i would be going for the VIESSMANN 222, stored hot water and a 5 year garauntee if fitted by a approved fitter. Where are you? What has been spec'd so far? Gareth

Would be alot easier to braze it IMHO, oxy acetylene and some copper phosperous rods (spelling) will do the trick and cheaper Edit, i thought he meant the branch of the 54 had split, Solder will do the trick

if you want the oso reps no. let me know

even better http://www.diy.com/diy/jsp/bq/nav.jsp?isSearch=true&fh_search=MORTAR+REMOVER&x=16&y=14

GOOGLE IS YOUR FRIEND MATE, http://cgi.ebay.co.uk/HG-HAGESAN-CEMENT-MORTAR-REMOVER-LIMEX-1L-NEW-!_W0QQitemZ260522061542QQcmdZViewItem?rvr_id=141133254021&rvr_id=141133254021&cguid=1c8dde8f12b0a0e201c2cb92ffee81e1