Search results

You changed the silver part too?

The UPS2 has a circuit board in it with the speed control electronics in the black part, these are delicate and fail frequently. If the motor in the silver bit is faulty it will kill any replacement circuit modules. The circuit modules often fail as a short across live and neutral, that often...

Post a photo showing exactly what part was replaced, I assumed the terminal box you were referring to was the black part of the pump where the wires connect?

The ones in the terminal box with the lights on.

The electronics are probably blown then.

But you used the old motor? The motor windings could be faulty killing the old electronics, now hew new electronics could be dead.

Was the entire pump changed, or just the motor? Does the shaft rotate freely through he bleed screw?

looks like it. It's probably a Legrande consumer unit.

Does the heating valve appear to open and close when heating is turned on and off? When off and closed the little manual lever on the valve should have resistance. It will be free when the valve is open.

OMG that wiring centre!

Not sure, must have read it somewhere, something to do with safety. Black used to be used for earth too, guess that should also be changed to g/y. By the way, I have just swapped my unsafe tanning lamp for this safe one that has no exposed live parts.

You should replace green earth sleeving with green and yellow if you are replacing the accessory.

The sad thing is this 1930s toaster that only cooks one side at a time is much faster than my pathetic modern one that does both sides at the same time. There is a design flaw with this one though, the stops that prevent the sides opening too far are too low, so the very hot metal at the top...

You can move the off screw to the white section at midnight if you want it off at midnight each night, the on time will still track the seasons.

I think it meant the opening where you put the bread, and it would take effort to touch it with your finger as it the tingly parts are under the opening. My toaster would not comply, as the elements aren't surrounded, it would be easy to touch them during normal use of the appliance. It makes...

They are permitted as long as the elements are surrounded by earthed metal IIRC. Lampholders with the lamp missing are also permitted.

You're saying my tanning lamp is unsafe?

I was working at a property last year, a plumber was trying to sell Ferroli to the client... :cautious:

We have fitted a few and yes they work. Try improving the existing ventilation first though, as it man not be needed. Opening any window trickle vents, better bathroom fans with a sensible timer overrun, not drying clothes indoors etc. The original owners of my house kept everything sealed shut...

Yes you can, there are plenty of high quality fans available. 4 years ago I fitted a 4" Vortice Lineo in-line fan in my bathroom, installed and ducted it properly. It is very quiet and the mirror and window no longer steam up when the shower is in use, I fitted the ceiling grille directly above...