Search results

That is an easy job then by using slip couplings and a branch assisted by a good lubricant.

Whether is an eyesore or not, standard external paint should not be used below the DPC on an untreated wall.

Once the DPC has been firmly established, I'd clean/scrape off as much paint/coating below the DPC as possible and then if still looking tatty, coat with a bitumen-based product such as Synthaprufe and then allow ample drying time before painting to match the rest of the wall. If you have some...

My answer will depend on where the installed DPC is located.

Before I can answer you, I need to know what material your existing drain is made from. Different materials require different approaches. If its salt glaze, then a drilling to remove a top section will facilitate the cementing on of a SG saddle.

Many new houses connect up to existing drains of other adjacent properties without any problems. If the rules are followed and inspection is signed off, all should be problem free.

I can't foresee any troubles providing he gets the falls right and indemnifies you fully in writing for any future problems concerning the new drain.

A great song from a fellow sheeny ✡️ Richard Marx

I have to admit, that the woman's game is far cleaner than those of the men. Far less whistle blowing from the ref as well (y)

You're confused! I'm still trying to get my head around the scrums .. are they a free-for-all for muff munchers or another way of putting the boot in ;)

He is running in 'slow' mode :LOL:

@pete01 That 'transformer' box looks like its metal, so what about an earth as a doubly insulated tag is nowhere to be seen?

Definitely remove any obvious loose material or you will be filling onto a moving base. I always 'prime' a surface to be filled with a 50-50 PVA water mix just ensure any excessive porosity has been eliminated. If its too absorbant, the filler could dry out too quickly and add to future...

I have a 1200 enclosed shower cubicle in my wife's en-suite room and that constantly shows evidence of overspray on the end glass panel furthest from the shower head. No matter how careful my wife is in her shower, the spray seems to coat everything up to around knee height and maybe even higher.

Any good reputable filler should meet your needs, but I've found Toupret Fibacryl to be ideal where slight movement still exists. https://www.toolstation.com/toupret-fibacryl-flexible-filler/p40082 "Excellent filler for use where movement may occur such windows and doors. Works very well easy...

My advice, for what it's worth, is to try and establish the cause of the movement and if the movement is still active. All buildings settle/move and to some extent expand/contract with the seasons, but IMO filling without establishing the cause could be a never-ending task.

Is it a door that has been caught. What about a good door from a scrap yard and a spray to match?

Burnham has made pitches at the leadership before and failed, so what makes him think he'll succeed this time?

IMO Starmer was already stuffed when he allowed Reeves to steal the old folks keep warm money. Most voters were completely floored by that action.

I'll willingly carry anything that is given to me for ID, but I'll not provide a highly intrusive smart phone just to facilitate a digital ID method. If the new digital ID needs a smart phone, then the state will have to provide AND maintain the phone(y)