Search results

plate to plate heat exchanger possibly, the water cant get through quick enough so its cycling on the stat. Possibly

Just turn the boiler stat down for the time being until you get a boiler engineer to it. If the stat is down it should cycle on and off before overheating. It's probably air, the water cant get round the exchanger quick enough so is overheating. Try bleeding anywhere you have a bleed valve

megaflow's aren't noisy, aristons in my experience are just not brilliant boilers. Just my experience!

This could really be a number of things. Valve, stat, programmer. Check if the valve opens and shuts when you call for heat, and see if the cylinder stat clicks when you turn it up or down

The light should be on when the boiler is on, maybe the have just wired the boiler to come live when heat is called for rather than wiring it permanently live with a switch live when calling

Yeah, cause it's below 2m.

No, the numbering is irelevant. As long as the wires are connected to what you have on the diagram. So all connections make and break in the right place.

No, old hole new flue. Old listed building in Bath Hampton

Although it is room sealed sorry!

So for an example, i've just fitted a new version of an ideal classic. Not by choice, but i had to re-use the flue at low level as it's under a kitchen unit. To change the direction ot the flue you have to take the fan out and do varius other annoying time consuming thigs. Would they not be able...

Ah sorry, my mistake! So can he not remove the combustion chamber cover then? :oops:

Loft insulation would work, not sure how well though, i know that the sand is most definately the best option. You could build a shelf(for want of a better word) just above the fittings to appliances, then fill to there. So not causing to many problems when doing remedial work.

If like you say you are boxing it in, build your frame and bored nearly to the top and fill it with sand as high as possible, then put the top bit of board on

GM, why amazing? Am i wrong in thinking this!

Its hard to price a job with out seeing it. There could be so many problems. But as a guide, i did a bathroom with a friend on saturday for cash, it took a day one in one out. £450

Is this a combi or system boiler?

Sorry correction worcester parts are readily available and reasonably cheap

I would recommend either a worcester, vailant, or alpha Ariston boilers are quite noisy. Advantage of worcester is readily available and relatively cheap Alpha boilers if you get the £120 premiere pack on top will give you a 5 year guarantee and are very quiet.

Yeah you can change******** pumps etc. Not to sure about flues and definately cant interfear with burner. The problem with the flue is obviously the products of cumbustion.

I'm a plumber yes. Why is this factually non sense?