Search results

  1. B

    hot water problem. HALSTEAD.

    not a big job costs around £2 ish though maybee more. for a new rubber. Halstead are knocked up almost exclusively with Italien parts. Maybe check out your local Plumb Center for the part orPlumbase
  2. B

    Ravenheat CSI 85 3 way valve dripping

    I find the best place for parts are The Plumb Center's parts dept. They are generally as cheap as on line - if not cheaper - and you can generally check out the boiler on their screen. Raven tend to use Italien parts and the part you may need is Italien. Their Condensing boiler is a simple...
  3. B

    Ravenheat CSI 85 3 way valve dripping

    Can't imagine how it could have been damaged in transit. Probably either the complete valve or diaphram need replacing. Is the boiler not under guarantee?Perhaps ring Ravenheat either for clarification or the name of a local installer
  4. B

    Vokera Linea 28 - Hot Water Problem

    I once had a somewhat similar problem which was down to the Air Pressure Swich In that case a bang with the screwdriver handle followed by a few blows/sucks on the tubes and it was working once again -permanently too. Now that cure was one that did not immediately come to mind! I assume you...
  5. B

    Boiler Problems

    If its a brand new property then the builders should be liable. Obviously the boiler has not been installed correctly. The Vaillant is an excellent boiler unlike too many of the people installing them!!. Immediately inform your landlord!
  6. B

    Vaillant VCW 242 EH temp guage kaput

    ChrisR:I think you are right its one unit with the probslipping into a tube. Thanks for the input.
  7. B

    puma 80e low pressure problem

    I sympathise with you - finding a good Heat eng is very difficult and being Corgi Reged is of course all too often completely meaningless! Now I'm looking for a dentist!!! Fortunately there are some excellent lads on here. I rather doubt if you can return the vessel - particulaly as I doubt...
  8. B

    puma 80e low pressure problem

    Should be fine for 10 average rads The flexi pipe would have to be considerably blocked but then as Croydoncorgi mentions mabee the hot water flow switch stuck. I would not have thought the pressure overflow valve would have been the first part to change as the pressure was showing high...
  9. B

    Baxi Bahama 100 Leak. (Picture Included)

    Is there cold water coming out of your tapes?If there is no water coming out of the Cold/hot tapes this would lead one think there is blockage in your incoming water supply.Perhaps them downstairs have "Done" somfink! Maybe even inadvertently turned of the water supply to your flat - it has...
  10. B

    Condensing: Stainless v Aluminium

    What are the feelings in respect of condensing boilers using Stainless steel units versis Aluminium units ie Stainless = Vallient/ Chaff/Halstead etc Ali = Worcester/Ideal/Volera etc I have seen a lot of degadation of Ali in the past!
  11. B

    Biasi cleaning the hotwater HE sardine can

    What is the best method of cleaning a combi sardine tin hot water heat exchanger /fluids etc?
  12. B

    Vaillant VCW 242 EH temp guage kaput

    Vaillant 242 Combination.The Temperature guage is kaput. Any ideas as to the likelyhood as to if its the guage or the probe?
  13. B

    leaking boiler

    If vision is impaired, wipe around the top and bowl of the Auto air vent with soft bog paper ( the best value comes fom Lidl. Lidl's best quality - lovelly on the more delicate rectum) Then somewhat later check out for wetness. Same goes for the pump joints. If the Auto is leaking best replaced...
Back
Top