Search results

oh right, thanks

Is jetwashing the best way to clean it or is products like wetandforget a goog alternative? Ive jetwashed before and hard work plus some blocks are wearing away

Thanks mate, I'll have a look

Thanks. Still had trouble but used the model number as you said on the neff website, got the part number from a downloaded pdf diagram and then used the part number to finally get it... Phheeeew.. Lol thanks again

I can't get an exact replacement. Would a different remote for linsar tv work?

I have a Neff oven, model B1GCCOAN0B I can find the oven if i Google the number, but get a "model not found!" when trying to find parts. What am I going wrong?

For fellow novices : Unscrewed the rings on Base of the switches and pulled cover off. Unscrewed the 2 screws at the top and slid unit up backing plate to unplug it from bottom unit, took back off unit and removed the 2 thin wires to the clock

Thanks ian and gas, will just do that

Dug out some papers. Baxi Bermuda 552 with an indirect loft tank fitted. The reason for wanting to change the control box is because the timer clock is noisey and i never use it. Can i disconnect the power to the clock mechanism and keep the switches?

Ah right, thanks for the info. Is there a compatible replacement i could get where i can look up the corresponding terminals to wire it up? Just something basic without fiddly timer functions

I've seen another thread on here, but wired differently to mine. I have 4 cables running into the Randall 3020P control box. The wiring into the terminals as follows : 1 = empty 2 = x1 red 3 = x2 neutral (1 black, 1 brown) 4= 1 black 5= empty 6= x2 brown 7 = x3 blue Earth = x3 green&yellow...

Thanks for the advice, much appreciated

Hello, I ordered a sample of the film, and aesthetically looks good when fitted to the tukip glass, only the odd tiny bubble. I was thinking though, is it on par with the proper safety glass? The film has safety standard conformity but would the manufactured safety glass be better for...

Will look into it, thanks for the replies

I have been decorating for my elderly mother who has glass panel doors. Glass is 27 x 32cm panels. 10 in each door. One door has 3 panels, 50 x 58cm. The doors have no removable beading, doors built around glass. Its not safety glass, so, before replacing the doors, is there a plastic...

Thanks John, been to get some glue. It isn't the main door seal on body, its a small strip on the door itself on the leading edge. Not sure what purpose it's for, it runs from top of door to the bottom of the window. And sticks out like a flange that nearly touches the rear edge of the...

Is there any glue i should use? Its thw rubber seal on the front edge of the rear door

Thanks again john, i take it the engine would just misfire if worn plugs rather than damage to engine? Im trying to get things sorted before tier 4 reaches us

Yikes!, i could take a plug out to check but looks tricky to get it out. Is there a standard torque setting when putting it back in? It's that zetec with exhaust problem i posted about