Search results

  1. T

    Dual circuit brake failure ?

    Thanks for your comments however i'm sure i've checked the rear brakes when jacked up previuosly and they worked then. Discs at rear, with seperate mechanism for handbrake, so operation of handbrake would not affect pedal on this vehicle. Can't see how both rears would seize at the...
  2. T

    Dual circuit brake failure ?

    Hi recently the brake pedal has dropped and only works from half way not spongy pedal was thinking that maybe a brake pipe had burst jacked the vehicle up and i can rotate either rear wheels when the brake pedal is fully pressed with the engine running ! looked all around the rear...
  3. T

    Mira 415 Shower temperature wanders

    Hi Have had this Mira 415 for 12 years fed from a Worcester Combi boiler, have not had to touch it in all those years. Has recently starting intermitanyley varying the water temperature, should i just replace the whole unit or is it just down to a worn cartridge ? Does the pressure...
  4. T

    amore/ecolite Roof windows?

    Bumped to the top I would also like to know about choices for roof windows
  5. T

    Worcester 28cdi losing press

    Hi KevPlumb thanks for the prompt reply screwed because there was water on the air side of the PV diapragm, meaning its split internally ? Thankyou
  6. T

    Worcester 28cdi Repressurising the Expansion Vessel

    Hi Having a problem with losing pressure in the system Followed the link to FAQ carried out the exp vessel repressurisation sequence A small dribble of water came out of the air connector with little pressure behind it. So i pumped up the vessel a bit and then released the air...
  7. T

    Worcester 28cdi losing press

    Hi Kevplumb or anyone else Followed the link to FAQ carried out the exp vessel repressurisation sequence A small dribble of water came out of the air connector with little pressure behind it. So i pumped up the vessel a bit and then released the air connector valve a bit more water...
  8. T

    Worcester 28cdi losing press

    Thanks Kev Plumb
  9. T

    Worcester 28cdi losing press

    ok how do i check an exp vessel ?
  10. T

    New floor structure in large loft.

    Hi i have not a castle but a 200 year old farmhouse, had structural engineer survey it and he reccommended a new sub floor of about 7 x 3 timber, biggest span was about 4m
  11. T

    Worcester 28cdi losing press

    Hi Have had a search and good read here but cannot find the answer as yet Please comment Boiler been in for 10 years ok currently gauge reads 0.2bar when heating is on it rises to 3bar when heating is switched off it settles to the norm of 1.5bar, but after 2hours it returns back to...
  12. T

    Boiler start sequence only on HW demand

    Having problems with a 28 CDI combi, and would like some ideas on what is the specific solution PLEASE Central heating stops working and 'domestic hot water demand indicator - flashing fast red light. ok Manual says its Air Flow Fault (RSF) checked fan flue, looks ok sparks and...
  13. T

    What does a Diverter Valve do ?

    Thank you for the Explanation :D
  14. T

    What does a Diverter Valve do ?

    Hi and what are the faults with them ? Having issue with 28cdi Worcester Combi
  15. T

    Worcester Combi Fault

    Slugbaby thanks for prompt comments Yes it is fan flue type, no issues with fan, runs really free Why might it be gas diverter, ?
  16. T

    Worcester Combi Fault

    Hi Having problems with a 28 CDI combi, and would like some ideas on what is the specific solution PLEASE Central heating stops working and 'domestic hot water demand indicator - flashing fast red light. ok Manual says its Air Flow Fault (RSF) , Flue Gas Spillage (OF) what do these...
  17. T

    SMEG Dishwasher error lights 4 & 5 on

    Hi DWI16 12C Tried to reset without any success When machine is switched on lights 4 and 5 on permanently and after a few seconds intermittent beep sounds continuously Is this a dreaded possible PCB problem ? Are there any checks that can confirm PCB faults ? Assume cost of...
  18. T

    SMEG Dishwasher error

    Tried to reset without any success When machine is switched on lights 4 and 5 on permanently and after a few seconds intermittent beep sounds continuously Is this a dreaded possible PCB problem ? Are there any checks that can confirm PCB faults ? Assume cost of PCB renders the...
  19. T

    SMEG Dishwasher error

    Model DWI16 12C Control Panel error lights 4 and 5 on, what does this error mean ? Have tried to reset the machine the normal way, it does not reset What can i do ?
  20. T

    Modifying T & G solid doors to Fire Door Spec

    Is it possible to router a slot in the door and fit intumescent seal section ? Would Bluiding Control accept ?
Back
Top