Search results

Hi there I have a Baxi instant combi 105e boiler.I have been having a problem in that when the hot water was running the rads were warming up. Upon investigation(through previous posts on this forum),I today have changed the diaphragms on the diverter and the pressure diff. valve.This has not...

Hi There My father in law is in the process of purchasing a wood burnig fire to replace his standard open fire.Are there any regs involved with this i.e does it have to be installed by a registered installer. Any info greatly received Grajam247

Hi there Have a look in the small feed and expansion tank when the heating is on.It could just be the tank filling up. regards grajam247

Hi There I did this last year for my brother in law. Use 15mm speedfit plastic pipe under the floor and copper above to make it look fancy.Advantage of plastic is you can buy it in 25-50 metre rolls so this means less expense and less joins.Use John Guest speedfit as these are a very good...

Thanks for that baxpoti. Are these items complete assemblies or diaphragms and other parts? regards grajam247

I have been having problems with my hot water to my mira shower(please see previous topic:Sat Feb 02, 2008 10:01 am ). I have a baxi instant 105e combi and have noticed that when I get out of my tepid shower the radiators are hot.Does this mean that there is a diaphragm gone or something wrong...

In addition to this shower problem i have noticed that the rads get warm when the boiler is in its DHW pre heating mode.Does this mean a diaphragm has gone or there is a problem with the diverter. regards grajam247

Hi All I have a mira Fino shower(two months old) that is not getting to temp.Had Mira engineer round the other day and he said that there was nothing wrong with the shower ,and that the prolem was that the boiler was not supplying enough hot water.The boiler is a Baxi instant 105e. I think...

Hi there Can anyone tell me what is involved with part p.I am a plumber and have a customer that requires electric underfloor heating installing in her bathroom.While i feel that i am competent to do this job, I am not Part P registered, so what would i need to do to get the work signed off...

The pipe to the shower gets hot to start with and then doesnt get any hotter when the shower goes colder.The supply is fed from downstairs and branches off to the shower and the basin.Tried the shower earlier with the cold isolated ran red hot for a little then got colder.Is this to do with the...

Hi All I have just fitted a brand new Mira Fino thermo mixer shower.I have adjusted the maximum temp control inside and yet still the shower doesnt seem to be that hot.The hot tap on the basin in the same room has a constant temp of water. The system that this shower is fed off is a combi...

Hi There I am in the process of finishing my City and Guilds in plumbing and am looking to go into the gas industry.The Corgi site says that i have to work with a registered gas fitter for a period of time.Is there anyone out there in the portsmouth/south hampshire region that would be willing...

Many thanks for the above info guys.Opened up boiler today and located the expansion vessel.Pushed in centre pin of shraeder valve and water came out straight away.Does this mean that the exp.vessel is definately shot. regards grajam247

I have a Baxi 105e instant combi boiler that loses pressure once the central haeting has switched off.Is there a few causes for this or is it likely to be a leak on the heating circuit.I normally have to recharge the pressure every one to two days. regards grajam247

I have a mixer shower which is fed from a Baxi 105e combi boiler.The problem i have is that the water that comes out of the shower is not as hot as it used to be.I have the temp setting on shower turned right round to the hoottest setting but still no difference.I know that the boiler is making...