apacheDIYman, good evening.
This may assist
Assembly and Operating Instructions – Up and over garage door
http://www.hendersongaragedoorspares.com › Up...
PDF
Or?
Google
henderson premier garage doors adjustment.
loads of u tube videos
Ken
Car insurance due, renewal notice cam in @ £ 385
jumped a lot???
Went on to a comparison site, same Insurer offered to insure me for £ 337
But best price on same comparison site [same cover] was £ 256
Wonder what I should do?? [guess]
My Energy supplier has just gone bust, this is the...
Littlemoney. good evening.
You can, if you wish make an Insurance claim against your Home insurance, under the heading of damage to underground services??
Ken.
Trying2bHandy, good evening.
Several things.
1/. cheapest option, re-paint the last time that option lasted about 5 years??
2/. plasterer to cut out the cracks install a scrim reinforcing and re-skim the entire affected ceilings.
3/. over board with plasterboard [most costly, and...
jamie473, good evening.
That finish could be?? a heavily textured external [masonry type] paint? Or a paint that has had a load of grit / course sand added?
As for a "fix" the textured paint needs to be removed and depending on what is under it a suitable primer / U/coat and top coat
As an...
Matty2000uk, good evening.
Did you take that image with your back against a gable wall??
If so ?? then that metal strip on the timber does it "Disappear" into that wall??
Why the question, that metal strip may be a restraint strap, there should be several of such restraint straps at...
Johnboy54, good evening.
How many times do you need to re-pressurise the system?
Could be that the leak is under the floor where you cannot see it or easily check for leaks.
Do you have access below the floors?? or not???
Ken.
ALwORKS70, good evening.
If you have the available space between door frame and roof timbers over, my choise would be a Pre-Stressed lintel + timber, so as to be able to fix the roof timbers to it.
Ken.
TM1303, good evening.
Have a try at using a "Bolster" and enter the tool on the "end" of the block a few sharp taps [generally] eases the block up and can be removed??
Ken.
Gizzydash, good evening.
Using your "T" ideas in both locations, adjacent to the right hand side of the Hearth + on the return to the right of the hearth.
You can use noggins or?? how about joist hangers, three per location??
Ken.
curium, good evening.
i take it that floor did not creak???
Suggest a "Bolster" and an old broad chisel use both [+ hammer] you could also try a sharp wrecking bar, make sure the "cutting ends" of the bar are indeed sharp.
Remove a large area of Laminate, enough to let you see the [general]...
furrykake, good evening, again.
As for the vertical cracks? do they run towards a chimney? from a fireplace? is so that is a different Issue, that could be Sulphate attack??
Really sorry but it is not easy trying to give unbiased advice from about 250 + + + Miles distant?? with three...
Was it "HELIBAR"? by any chance?? Long, well over a meter long strips of newish mortar ?
If so the alarm bells should begin to sound,
Or was the Phrase used by the builder ? was it "Retro- fitted wall ties [small circular holes covered over with sand cement?
If possible interrogate the...