Search results

Longest I have found is 570mm. Does anyone know if longer is possible and where to get it? I need about 1.5m...

The access is limited; basically what you can see for the cistern in the phone. The connection is like this for the soil pipe (flip photo 180 degree horizontal, flow direction is right) as there is another toilet connected so it's not a straightforward single connection and the flexible...

Builder says because the previous builder has used a flexi connector which is not right, it cannot go further back. The box is about 180mm deep. What the options to get this further back, ideally right to the tiled wall?

I had the same crap in my trap. Now cleared. But the condensate pipe was also blocked and needed drain unblocker (tried blowing down tube first which has worked before). Never had to clean out a trap in a 15 year worcester or vaillant but Ideal and this Main have stopped because of it. Good to know!

Thanks for insisting, it was the condense. I was thrown by the water coming out from elsewhere and the boiler not shutting down like other good brands do. I still can't wait to change this rubbish brand boiler!

From what I have read, condensate backing up should be overflowing from the bottle trap and perhaps shut down the boiler with an error code (E133?)

Before I saw inside I thought blocked condense but it makes sense that the condense has backed up all the way to the section showing the leak. Will investigate more...

When running the boiler makes a noise like it is sloshing around lots of water. Engineer said to try draining the system. The pressure normally changed depending if running or not so I suspect it is the water in radiator. No sloshing around sound when heating hot water.

When running. The part referred to in photo is nowhere near condense pipe and isn't condense water.

While the central heating, water is trickling out of the bottom end of the rear black tube in photo, where it connects with the metal section. There is corrosion at other connections. The PCB has been changed a few years ago and there was also another issue with it losing pressure. It's about 12...

True!

Will do thanks. The whole PCB with speaker seems available but it's pricey at ~£60.

Thanks, I connected a speaker to it and there was zero feedback so it could be a capacitor or something rusted that has failed.

Is there a typical/average speaker type that is used in units whatever the brand?

It's this one: https://www.intercomsrus.com/handset_documentation/Kallglobe%20TN-5HK%20Intercom%20Handset%20Data%20Sheet.pdf

Sadly no markings visible :(

Hopefully it comes away easily. It has 12v feeding it; do the ohms and watts matter a lot? Would a 12v signal in this type unit blow the speaker or perhaps not produce enough sound? Is any movement from the ohms/w okay? Was thinking of getting:

Connections could be corroded?

Outdoor doorbell-intercom unit lets the residents hear outside from their handset in the flat, but the visitor cannot hear any of them. Handset issues have been ruled out. The speaker was making a loud cracking sound prior to failing which I read is a sign of a speaker that's about to die. Can...

I'll try your cling film idea as your reply suggests the explanation would be continued damp. It's ~130 years old.