Search results

  1. P

    Fitting Spirotech MagnaBooster MB3 DIY

    That diagram is one I just picked up just to give an example. It is not a diagram of my system (although it is very similar). I think I may have the Y-plan system (will try and get photo later). The pump seems to have 3 settings. Which setting should the pump ideally be on? When would you use...
  2. P

    Water hammer when there is no flow

    The plumbers who did the work, what do they say?
  3. P

    Fitting Spirotech MagnaBooster MB3 DIY

    Thks, that is helpful and i had read it before. "circulate it for four weeks, drain, rinse, refill," I was really after more detailed, step by step (idiot-proof) instructions about the drain, rinse and refill bits. And how to bleed the air out of the system after refilling. Thanks Read...
  4. P

    Fitting Spirotech MagnaBooster MB3 DIY

    What would be the best or Simplest way to for a home diyer to flush the hot water/heating system out to get rid of some of the particles/rust that may be in the system? I appreciate that it may not get rid of everything that's in there. I don't really want to disturb anything, unless I have to.
  5. P

    Fitting Spirotech MagnaBooster MB3 DIY

    Sorry, i loaded the photo up but then forgot click save and it was lost.......lol Re did again, and then it was showing afterwards.
  6. P

    Fitting Spirotech MagnaBooster MB3 DIY

    I would have just left it, but my heating cover people say I have to get the MB3 fitted.
  7. P

    Fitting Spirotech MagnaBooster MB3 DIY

    The component shown with the RED arrow shown in photo PIPES2. What is it, what is it for, and what does it do? thanks
  8. P

    Fitting Spirotech MagnaBooster MB3 DIY

    Everything on the system works ok.
  9. P

    Fitting Spirotech MagnaBooster MB3 DIY

    The arrow on the pump does point up (photo image1) Thanks
  10. P

    Fitting Spirotech MagnaBooster MB3 DIY

    Thanks. Any thoughts on where & how to fit the Magnabooster in the airing cupboard? Not sure which pipe to cut into?
  11. P

    Fitting Spirotech MagnaBooster MB3 DIY

    Yes, I tried feeling the pipes, but to my surprise they both heated up at the same time and I couldn't be sure which one heated up first. I will have to give it another go. Any Potterton Prima F experts on here?........ Yes, it is tight. I guess it would have to go in the airing cupboard. Will...
  12. P

    Fitting Spirotech MagnaBooster MB3 DIY

    Hello. I want to fit a Magnabooster MB3 to my central heating/hot water system. I believe (but i'm not sure) it's a open vented system and there is a pump in the airing cupboard. It's very similar to the system shown in Diagram. It has a hot water tank in the airing cupboard upstairs...
  13. P

    Potterton Prima F not firing properly.

    My boiler is a Potterton Prima F. I think it might be a 40F. The boiler can be used to heat both the central heating and the hot water at the same time, or it can be used to heat just the hot water or central heating individually. 97% of the times the following seems to happen. 1) Front...
Back
Top