Search results

looks like a straight forward skimming job all around,just make sure u got plenty of scrim in the gaps,mybe bond some ares out a bit

hi guys and girls,my neighbour had a leak in his kitchen,his builders where in today and reslated his side of the roof,before there was ridge tiles running down the middle seperating the two roofs,this is how they left it,there is a metal kind of drain in the middle now but my tiles dont connect...

its defo an whirlpool dude,its etched into the door,albiet an old one,05,theres a big lond number about 30 odd long but they look like random numbers. ive figured out the salt level light is on,havent put salt into it in years,eek,would that be anything to do with it. im going to get some salt...

hi zipper,had a look and it says ADG450/05 FD8203700122 i took some pics of the door open. cant tilt it forward unless i take it out of its housing. i hope this sheds some light on it so to speak,all the pics are taken in order whilst the door was open and without pushing down the big...

also forgot to mention,i had to scoop out the water and then suck up the rest of the stading water with an syringe to get all the water out completly to have a good look and see where the screws go, to put the plastic back in.

also the flood protection device,can it be reset,im sure i havent a leak,but something might have knocked it whilst i was taking the machine out of the built in unit,somewhat clumsily i might add,and the having to put the b##tard thing back in which needed a few kicks and a lot of cursing. we...

when i had the plastic bits off,i could set on rinse,water would come out the top and the little wheel thing would spin,now ive put it back together the light wont go out on the controls,i can press rinse the light goes on,then press wash and the light comes on,normanly it wouldnt have done...

hi guys,my dishwasher is blocked,ive checked the hoses at the back,all clear,took what i can from the inside and poked some wire down the drain hole and seens clear,im i missing something here,ive tried drain block down the inside,should i try stronger stuff,cheers for any advice. ps the washer...

a lot better than putting it down ur drains,eek

the concret was allready layed the year before and not very well,about 5/6 inches deep,as it was pretty level,just five dollops on each flag,1 in each corner and 1 in the middle

thats it all done dude. congrats on the non smoking,1 year here now

cheers cris,will see when i take it apart tomorrow. in the mean time,at the boiler ive got the c/h and the h/w set to off,the valve upstairs,the nearest one is stuck on the left[man]but if i turn the power off completly,it goes back to the other side on its own,the pipes going into and coming...

ok,so if i cant free the spindle then i have to buy the brass valve which comes with the actuator allready attacthed,is that right,which will mean draining the system,is that right,ta