Search results

i went back into engineer and confirm devices then exit , now allows me to arm and disarm every day is a learning day many thanks

I have 2 keypads one on address 1and other on 2

User type standard Access areas a&b Allow arming Allow disarming Allow omit Disarm first Allow user menu Report open closed zone 11 entry/ exit Area a Zone 12 entry exit Area a Zone 13 guard. Area b

Done. Event log shows system access by user 02-John. But no other detail

Yes it is off This is a user code

Type in user code It then comes up welcome back John. Then asks if I want to arm system. Press y then beeps once then confirm device comes up to 2 seconds then back to main screen no exit tones

Nothing in the log

One more question. All good now but when I try to arm the system it just beeps once comes up confirm devices then goes back to front screen no exit tone and does not set. Help. Please

Seems to be sorted. Default the nvm with commissioning jumper off. Then re-learn all devices. Many thanks for the help.

Still no luck it will not go into learn mode

I did try your suggestions but I am called into work TIL 8. I really appreciate your help.

No did try them just have to back into work tonight. Thanks.

Ok. Many thanks. I will try it but it will be after 8 before I get to it. just confused why it will not take the yes input to go to power up device.

Ok will try. That. Yes I have a pc connect cable and have Wintex on the pc.

Nothing else connected and all batteries out of pir and contacts.

Yes that’s all

I get to the learn device Zone 9 for example. But when I hit yes I get a single tone and the screen does not change to power up device I am trying to learn a keypad. Pir. Or contacts. I can’t get it to the power up device screen.

Also I have tried to default the system to see if that helps but doesn’t.