Search results

Is it work disconnecting the wire from the heater connecting to the Isolator box and wiring to standard 13 amp plug and seeing if it works?

The link seems fine when i checked it, no discolour or burnt, is there anyway of checking if it's wor king?

Yes circuit breakers are on. Only very basic knowledge for multi meter.

Anyway of resetting?

Hello, I have 3 storage heaters that were working fine and suddenly one has stopped working. They are really old heaters, I think the model number is 79052(pic attached). I have checked the fuse, each heater has its own 13 Amp Switched Fused Spur with light, nothing wrong. I have removed the...

Definitely some sort of leak, installer wants me to get second opinion before he is prepared to take responsibilty and start any repair work.

Yes gets worse after heavy usage, house is rented out and in the past 2 weeks a couple of them are away and because of less usage the problem has not become worse. The 2 that are away are due to return on Sunday and with more usage I can envisage the problem getting worse. Unfortunately the...

Hi, I had a thermostatic shower mixer installed in the bathroom. The wall that it was fixed against backs into a cupboard in the passage. Recently I have noticed wet patches on the wall in the cupboard. When I showed it to the person who installed the shower he swears its condensation where...

Twisting the two alarm cables (blue & yellow) at the panel end still shows zone 3 as active.

Ok, will try, can you just tell me exactly how to put a link in zone 3 at the panel end? My brother installed the alarm system but he's on holiday for 2 weeks. Thxs

Hi, yes the system does set by pressing omit 3 prog, I tried last night and it worked.

Hi, I have the above alarm system installed, been working perfectly however this evening whilst setting the alarm for the night part zone 1 downstairs, the system would not set, it's showing that zone 3 is open. All the sensors seem to be working the red light on the detector comes on when...