Search results

Is the light still on? DTC - diagnostic trouble code, it may take a while as it could be related to engine running, cooling, heating etc. You need to run the car now and see what pops up. Link to VAG codes here http://passat.pavsweb.com/docs/Diagnostic%20Trouble%20Codes%20(DTC)%20...pdf

Well done girls, you all owe the goalie a drink!

Try ironmongery online, I haven't checked but they have loads of hinge types.

Could you use a jigsaw to cut a hole in the bottom panel? Keep just inside the edges and that may allow you to get enough material out to remove the panel.

That tank would be classed as a confined space and as such would need to be forced ventilated and tested before anyone could enter. Even a child although they are fine to be put up chimneys.

News report I heard said 5000 police providing security. Now we know why they have no time to investigate a burglary or bike theft.

You need to delete, run the engine/drive, then rescan and identify the codes remaining. What scanner are you using and what car?

What he said ^, Reset codes then rescan

Car principle is exactly the same, there are some excellent videos on you tube from detailers etc.

Keep the pad moving and use a water spray bottle to lubricate and keep cool. G3 polish then clear lacquer.

That price is an absolute bargain! I have used polishing compound to sort car headlamps followed by clear lacquer. Not sure I would try it on caravan windows.

I wouldn't be concerned about that noise or movement. As already stated driveshafts are best checked by driving a circle on full lock in both directions. Do you have a knowledgable passenger you can take for a run out. ESP light could have been disturbed, obd reader/reset?

Thanks, if you want to make any mods to the stl the offer to print still stands.

Any idea what the material is that the 3gd3d.co.uk used?

What did you get and is it still working. Oh and the spin speed please, asking for a friend.

You would need to practice but a curved plywood template as a guide clamped to the worktop and then a router. Jigsaw and tidy up with router.

Here you go

I have just watched a you tube video of the replacement. He gets at least 6/7 turns on the inner tie rod using a special tool to grip it and a torque wrench. If you only have 1 turn that is dangerous and should be checked immediately. The tracking will also need to be redone as obviously the...

2x4 inside a window with the ladder lashed to it. Rope over the roof and tied to car bumper, just make sure the Mrs ain't :LOL: going shopping

Send me the stl file and I can print one for you. Cost of postage to a charity of your choice. I shall need your address too. I promise no stalking!