Search results

  1. W

    Laminate Floor Underlay

    :roll: Is it ok to lay laminate underlay fibre boards over carpet first then put laminate ontop. I would have thought this would provide extra insulation, both noice and heat, along with providing the floating aspect needed for the laminate :?: ____________________________ moderator...
  2. W

    Wylex adding MCB's

    And all this anarchy ensued because I couldn't figure out how to wire up my conservatory. Made by Anglian, assembled by Anglian manufactured in Sheffield! :lol:
  3. W

    Wylex adding MCB's

    Well have finally got round to putting in MCB's. All seems well :o except; Conservatory lighting has tripped the 6Amp MCB three times in the first week, but only when they are switched off, haven't tripped again since, 2 weeks later, I'm baffled. The lights in the conservatory are...
  4. W

    Wylex adding MCB's

    Cheers FWL, now I not only have to worry about the spaghetti of incorrect wiring lurking below the surface safety of my platered walls. Connecting my £1500 cooker to a 13 amp spur but you now make me aware that the 'competent well recommended' electricians which I got to do the work have me...
  5. W

    Wylex adding MCB's

    Ban, I know you said, is this one not a Type B suitable for my CU. Found it here http://www.3kw.co.uk/mcb.html BTW Thanks for the help in posting pictures Breezer. Yet to look at the CU to clarify FWL's remarks in previous posting. Cheers
  6. W

    Wylex adding MCB's

    The cooker plot thickens :? On investigating further, following your last post FWL, I have discovered more reasons for concern. The cooker panel I purchased for the electricians to connect my cooker to was here...still haven't worked out how to insert pictures, sorry. It has never been...
  7. W

    Wylex adding MCB's

    Thanks for your prompt response, sorry it takes me a little longer to investigate your advice. I quite agree it would be better to get an electrician to look at all these points but electricians, who had all the right recommendations and memberships and were registered with my local...
  8. W

    Wylex adding MCB's

    Thanks for all that info Ban & FWL. Believe me it is much appreciated. Just been trying to digest it all and feel that the help youv'e given has put me in a positive mood as to how to design the supply. However I am very worried about the cooker situation now. The cooker that was in the...
  9. W

    Wylex adding MCB's

    May I start by saying thanks for the help so far guys. The fog of electrical wizardry is SLOWLY being lifted from my eyes by this discussion far more quickly than I could have hoped for. Yes, I know it might seem like your talking to a brick wall but yes I did realise I'd made a mistake by...
  10. W

    Wylex adding MCB's

    As you have probably guesed I am no electrician, or anywhere close! And I am very new to this Forum, but I must say how grateful I am for the help so far. Reading some posts has already enlightened me greatly. I intend to install the circuits for both downstairs, upstairs, conservatory, and...
  11. W

    Wylex adding MCB's

    I have had extensive home improvement work carried out and I need to add some MCB's to my Wylex NHRs6604 unit. I have installed a ring main into a conservatory (2.5mm2) a lighting supply and a single 2.5mm2 cable connected to aarmoured cable to supply the garden shed with power. I know...
Back
Top