Search results

OK ended pulling the thing apart last night - very easy thanks to your clear instructions works1 (apart from a slight disagreement with my knuckles). Having looked at the element, there appear to be two score marks which I would not think are there by design, about 2" or so in from the plate -...

OK thankyou, sounds like a job for tomorrow, will let you know how it goes :)

Great shout works1! No tripping with the wire off. So pretty much safe to assume the heater? So now for what looks like the hard part - how do I get access to change the thing? Looks like it's underneath the drum at the front...

rock1 - This is a photo of the wiring going to the pressure switch. As you can see there is a purple/green, a red/green, and 3 white ones.... no grey. What ones do I need to unplug? fidom - Thanks will check that as a poss cause if the heater proves to be at fault. Gary C

Hotpoint WM62P

Thanks rocks1 will try tonight :D

Hi all, As per the title, machine trips RCD within a few seconds of being turned on - any cycle selected. If door open it's ok, as soon as door closed it trips. So I'm trying to establish if this means it's the door lock? But I assume power is not supplied to the rest of the machine until the...

Guys, I need to do exactly this - does this come under part P? Thanks, Gary

Hi, Well pretty much, but I don't know what to do with the new DPM where it sits on top of the existing slab? [/img]

Hi, I have an existing Conservatory base which I am re-using for a new Conservatory. The old Conservatory was full height glass, the new one is on a 600mm high wall. Builder has dug footing around the outside of my base and built cavity wall up (so inside blockwork face is hard up against the...

Thanks very much :lol:

Thanks all, Yes it's a two storey house. woody is that stated in the Building Regs then? I know that our internal door to garage is definitely Fire Rated, others are 44mm thick but do not look anything special so would make sense.

Hi, I need to replace the internal door that leads from the hallway to the lounge. Currently it has fifteen glass panels and is 44mm thick, it is very heavy and I believe it is a Fire Door. The house was built in 1988 and the main downstairs internal doors are all this thick (hall to kitchen...

Tony, To clarify - when I say 'I have' I meant that I have paid for it to be done. I had a CORGI Engineer do a service, and he replaced those parts, he was also the one to advise re the cracked burner (which he showed me and we hoovered off dust etc). He does not however, offer a fixed price...

Agile, Sound advice of course, and I should point out that I am not looking to undertake any 'gas' work myself - I am looking for a range of opinions so that I can pin down the most likely fault and if necessary get a Corgi Engineer to replace. I don't want to pay someone to keep replacing...

aaronH - Thanks, but being that I've got a new door seal, how would this cause it to shut down? OK - A theory, Could it possibly be the CH pump? I say this because lately it has become a bit whiny. It was set to speed 3 (highest setting). If I reduce it to speed 2, it becomes much quieter (so...