Search results

  1. R

    TRV systems

    Hello, Is is a MUST requirement to have one radiator with out a TRV? Im currently installing a Honeywell Evohome system with HR80 radiator valves and BDR91 boiler controller. The room thermostat was previously in the hall way on the an old glowworm ultimate system (boiler now been...
  2. R

    Light Ring Earthing

    OK, got ya and do you loop back to the CU (as in a ring) or just a single supply from the CU as a radial?
  3. R

    Light Ring Earthing

    Or do you just send the send the common live, the three light lives, and a single earth cable down the channel and then link the neutrals up in a junction box on the joist
  4. R

    Light Ring Earthing

    Yeah its not a huge installation Ive already chopped in to the wall for new socket positions and light switch positions, so this is not a problem. So to do it properly I assume you run twin and earth (1.5mm) from CU. Do you then send a twin and earth down to the switches with the twins...
  5. R

    Light Ring Earthing

    Hi, As Im currently doing out the lounge, I have chance to update the wiring (house wiring is 1969) Ive already split the downstairs ring mains which was original one complete ring (including kitchen) and now have kitchen, upper and lower rings separate. Unless told otherwise I dont...
  6. R

    Cylinder Problem

    Do I need to change some of the pipework you think?
  7. R

    Cylinder Problem

    Hi Daniel, The pipework to the right of the picture is just blanked off, I think its old pipework for something, but its not been used for ages You right, I messed the diagram up slightly as the piping by the boiler is behind junk and couldnt quite see it, Ive rechecked it and redone the...
  8. Untitled

    Untitled

  9. R

    Cylinder Problem

    Thought Id better get some images on the go to explain what the pipework looks like
  10. Untitled

    Untitled

  11. Untitled

    Untitled

  12. new

    new

  13. R

    Cylinder Problem

    The boiler was originally a Glowworm Ultimate (I think a 50), but it was replaced with a Baxi Solo 15HE last year (no changes to pipe work were made) Thought Id better take a picture of the cylinder just in case. But the small black header tank looks like it feeds both the cylinder and the...
  14. Untitled

    Untitled

  15. My Piccys

    My Piccys

  16. R

    Cylinder Problem

    Hi, Looking for some help with an issue I have with my water cylinder. The currently cylinder is one of the double tank types, I think the bottom tank is the hot water part and the top tank is the header tank (cold water) It seems to be constantly over flowing (via the overflow pipe)...
  17. R

    Soffit Vents

    lol, sorry Its a semi detached house, with a one side hipped tiled roof. Its the old brown paper stuff under the tiles (old house!) House has cavity insulation and loft insulation. Loft houses water cylinder and expansion tank for hot water. Nothing else much in there (other than storage)
  18. R

    Soffit Vents

    Short question: do I need soffit vents?
  19. R

    Window replacement - does it need to be toughened

    Evening All, Im looking to replace the lounge bay windows which is currently wooded and very thinly double glazed. I believe they call is a dog leg window, its a large window that has a 45 degree section on the right side (making it like a half bay I guess) The main window is quite big...
  20. R

    Outside Lighting

    Hi All, Would you wire outside lighting in to the ground floor lighting circuit, or from the ground floor mains ring. There is a potential a flood light would be fitted to this outside lighting, and if someone happened to fit a 500w flood light this would be 2A of the lighting circuit used...
Back
Top