Search results

The panel may revert to 'Factory Settings' i.e. your password is not going to shut it up on power up! Factor setting is usually 1234 0r 01234 enter. DS

Yellow =sw live Why would yellow be neutral if there is a black ? DS

Bored

No reason why you shouldn't / could'nt 3 phase DB's have the mcb's mounted side'e e ways !:) DS

This the ideal solution, easy to install and control in the event of a fault. DS

Reactive push and a Or an electronic dimmer with multiway switching using reactive pushes, i.e. lightwave RF or Varilight. Only two wires required exactly the same as mechanical time switches. DS

On a 16a mcb :)………. DS

I think you need an electrician with test kit to determine what the problem is, You may be surprised ! If it's a simple fault. DS

you think :rolleyes:

Ask a tiler !:D DS

I would favour making it into a ring, you have the 32a mcb and the wiring is 50% done !(y) DS

Yes, could be. But in view of the lack of isolator i would want to confirm the earthing arrangement. :cautious: I never assume ! DS

There should be an isolator fitted to that supply cable to you're outbuilding if it's more than 3 meters to the CU in the outbuilding. And why are there taped up cables coming from the house ? Where's the earth ?:confused: DS

You would require a 5th wire for that. This switch has 4 = 2x stappers 1x sw wire (hall light) 1x live feed. The OP had already identified the live and maked it when they removed the switch. DS

I prefer not to use the 'pick and mix' method, to wiring. It was a comfort to note the silence from the electrcians while pick a wire any wire game went on! At one point the OP was told to check all other lights were working ! With no mention of making safe the wiring hanging out the wall...

Usually it's dado trunking with a 32a switch at one end supplying a run of sockets. regards, ds

Hi, lollipop 6mm -Isolator- ring. If retro fitted, usually as my original post. Regards, ds

Yes, standard practice in control room situations in theatre and recording studios. DS

I assume both supply legs of the ring are paired at the 32a switch and connected to the 'suppy' and the kitchen ring is connected to the 'load' ? DS