Search results

Belated feedback on this one. The culprit was the n/s sway bar link. The fault was not evident until driven some miles and the suspension warmed up. When I parked up and twisted the link, I could feel the 'snatch' in both ball joints. I replaced both sides with Moog brand from a local factor...

Not really if its an FOC parts and labour c/o Vauxhall. Merely my curiosity about the part, why it needs attention.

My sister has told me her 01.2023 petrol 1.2 Corsa has a technical recall from Vauxhall concerning an 'oil jet cooling nozzle'. From what I've seen online, this is a tube that sprays oil up underneath the pistons. Am I correct?

This photo is of the back of the lcd display that lies on the pcb. I can only assume the lcd was bonded to the pcb.

Its a kitchen weigh scale, Salter brand. Was asked to look at it. It was switching on but not displaying any weigh values. When I took it apart, the LCD was loose. Can these LCD displays be easily bonded back on to the PCB?

Both wheels need a bit of attention, the one with a bit of a growl mentioned above and the lock side needs tightening up a bit. The door's always had a bit of a click sound when being closed and I noticed the door edge lower is hitting the frame. The bottom of the door on the lock side has a...

All done! Used a long reach ph2 bit with 1/4 drive ratchet. The ph2 driver handle was too thick to get the driver blade level and seated on the adjusted head. Now the door is running on the wheels, one of the bearings is growling a bit so either dry or worn. Thanks All!

I want to adjust the runner wheel height to lift the bottom of the door frame off the sill. Does anyone know what tool is need for the adjuster? I've inserted the likes of philips, straight blade and allen keys in the bottom hole but none seem to engage with an adjuster.

Its Co Durham The flue goes into the attic and out the gable end. The diagnoses is a chocked/blocked heat exchanger, £910 inc vat quoted to supply & fit a new one. The 5 year warranty compared to the 10 year is likely the price difference. Warranty is paying for replacement parts in advance.

My sister's 15 year old Procombi A32 has been condemned because the heat exchanger is blocked. The heating business that fitted the Procombi have quoted for a new boiler install. Main combi 30kw £2198 inc vat (5 year warranty) Baxi Platinum 30kw £2846 inc vat (10 year warranty) Are these...

Its the split/cracked rubber seal in the photo and the plastic cover that fits over it. Next door's still intact. I can get a new seal if that will prevent water ingress in any mortar gaps.

I'll replace both the rubber and cover but what purpose do they serve if the protruding flue pipe has been rendered around with mortar?

Thanks to the delightful wind we've had the cover has blown off and away. Does anyone recognize the type I should source for replacement? The rubber ring still in place is a about 95mm i/d.